Skip to Main Content. Please Contact Us if there is anything we can do to improve the Accessibility of this page.
070-700-106 - CHASSIS-CAB, SINGLE AXLE, CLASS 7, 33,000 LBS. GVWR (4x2)
| NOTE: | This detailed specification is not complete unless it is used in conjunction with all conditions of the Technical Specifications. |
| INTENDED USE | INSTALLATION OF VARIOUS TYPES OF AFTERMARKET BODIES RANGING FROM 10 FEET TO 24 FEET IN LENGTH AND TRANSPORTING UP TO THREE INDIVIDUALS ON PAVED AND UNPAVED, GRADED ROADS. |
| *GVWR33,000 lbs. | |
| PAYLOAD CAPACITY21,750 LBS. (APPROX) | |
| *GVWR - Gross Vehicle Weight Rating is the total maximum weight of a fully equipped, fully loaded truck. | |
| 10 | ENGINE: |
| A. | Diesel engine, 5.9L, 210 Gross HP (per the latest issue of SAE J1349) and 605 lbs.-ft. Gross Torque, minimum. The following engines, or approved equivalent, are acceptable: |
|
CAT C7: 7.2L, 210 Gross HP, 605 lbs.-ft. Gross Torque CUMMINS ISB: 5.9L, 245 Gross HP, 660 lbs.-ft. Gross Torque DURAMAX 7800: 7.8L, 215 Gross HP, 660 lbs.-ft. Gross Torque INT VT365: 6.0L, 230 Gross HP, 620 lbs.-ft. Gross Torque MERCEDES-BENZ MBE900: 6.4L, 210 Gross HP, 605 lbs.-ft. Gross Torque | |
| B. | Standard cooling system with antifreeze. |
| C. | Dry type air cleaner with service (restriction) indicator. |
| D. | Engine protection system, at a minimum, must be activated by low engine oil pressure, and high engine temperature. System shall, at a minimum, include a warning light(s) and derate (ramp down) feature that will reduce engine power and speed, or shut down the engine when any of these functions exceed normal limits. |
| E. | Horizontal exhaust. |
| 12 | ELECTRICAL SYSTEM: |
| A. | Minimum 100 amps 12 v. alternator. |
| B. | Batteries to have a minimum total of 1100 CCA @ 0 degrees F. |
| 20 | TRANSMISSION: Minimum 6-speed (International may bid a 5-speed) automatic transmission with provisions for a PTO. Allison 3000RDS or approved equivalent. |
| 30 | AXLES & SUSPENSION: |
| A. | Steel front axle and suspension, minimum 12,000 lbs. capacity. |
| B. | Front shock absorbers. |
| C. | Front wheel oil-lubricated bearings and seals. |
| D. | Single speed rear axle and suspension, minimum 21,000 lbs. capacity. Rear axle ratio is to be a 6.14/6.43/6.50 for 2400 RPM engines, 6.50/6.83/6.86 for 2500 RPM engines, 6.43/6.50 for a 2800 RPM engine, or the closest possible ratio available that will provide a top speed of approximately 65 MPH. |
| E. | Front wheel hubs and rear axle shall be filled with synthetic lubricant. |
| F. | Auxiliary rear leaf spring(s) or rubber helper. |
| 40 | PERFORMANCE ITEMS: |
| A. | Factory installed speedometer; odometer, ammeter or voltmeter, fuel gauge, engine oil pressure gauge, coolant temperature gauge, tachometer, air pressure gauge and dash mounted engine hourmeter. |
| B. | Power steering. |
| 50 | COMFORT ITEMS: |
| A. | Factory installed AM-FM radio. |
| B. | Air conditioner with integral heater and defroster. |
| C. | Arm rests both sides, if available; sunvisors, both sides. |
| D. | Tinted glass all windows, including windshield. |
| 60 | SAFETY ITEMS: |
| A. | Air horn(s), mounted under the cab or hood, or behind the front bumper. |
| B. | Standard electric horn. |
| C. | Outside mirrors, left and right side. Mirrors to be 6 inches x 12 inches, minimum, with convex mirrors on both sides. Mirrors and brackets shall be of rust and corrosive resistance materials such as stainless steel, aluminum, coated metals or composite materials. Painted mirrors and brackets are not acceptable. |
| D. | Automatic-adjustable volume backup alarm. Must meet latest issue of SAE J994, Type B, 107dB (A). Factory or dealer installed. |
| E. | Rain Flaps: Splash and spray suppressant rain flaps, straight grass type, installed on heavy-duty hangers. Factory or dealer installed. |
| NO VENDOR ADVERTISING OR IDENTIFICATION WILL BE PERMITTED ON RAIN FLAPS. | |
| F. | All access steps shall be self-cleaning slip-resistant grating. |
| G. | Daytime running lights. |
| 62 | BRAKES: |
| A. | ABS air brake system, minimum 13.2 cfm air compressor. |
| B. | Spring applied parking brake. |
| C. | Front and rear automatic slack adjusters. |
| D. | Front and rear dust shields. |
| E. | Outboard mounted brake drums, front and rear, if available. (NOTE: Allows brake repair without removing axle hubs.) |
| F. | Low air pressure warning indicator. |
| G. | Air dryer with heater. Bendix AD-9, AD-IP, AD-IS, Wabco System Saver 1200 or approved equivalent. |
| 070-700-106 | CHASSIS-CAB, SINGLE AXLE, CLASS 7, 33,000 LBS. GVWR (4x2) |
| 70 | TIRES & WHEELS: |
| A. | Six (6) 275/80R22.5G (14PR) or 295/75R22.5G (14PR) or larger, tubeless, low profile, radial tires with highway tread. |
| B. | All wheels to be one-piece steel disc, 10-hole, I.S.O. hub pilot mount, 22.5 inch diameter. |
| C. | Front, inside rear and outside rear wheels to be fully interchangeable. |
| 80 | CHASSIS, FRAME, CAB: |
| A. | Minimum 33,000 lbs. GVWR, factory certified. |
| B. | Minimum 1,740,000 in-lbs RBM frame. |
| C. | Cab-axle dimension of 84 - 86 inches. |
| D. | Factory installed fuel tank(s), minimum 70 U.S. gallons. |
| E. | Front tow hooks or tow pins. |
| F. | Standard front bumper. |
| 82 | CAB EQUIPMENT: |
| A. | Conventional cab, with tilt-type hood and fender assembly. |
| B. | Full-width bench seat or individual driver seat with two-man passenger seat. |
| C. | Grab handle(s) for cab entry, located at each entry door. |
| D. | Manufacturer's standard paint and colors. |
| E. | Rear cab window with fixed tinted glass. |
| 90 | CONDITIONS: |
| A. | Bidder shall provide a manufacturer's print-out (Ford "DORA"/"Commerical Truck Tools", Freightliner "Spec Pro", "GM AutoBook", International "Vehicle Specifications", Mack "Order/Customer/Vehicle Information", Sterling "Spec Pro", or approved equivalent) to verify the vehicle bid meets all the requirements of this specification. Also, any dealer installed aftermarket components, if specified, must be noted on the manufacturer's print-out. |
| B. | Welding shall not be permitted on the frame side rails, nor shall the frame rails be cut to lengthen or shorten the wheelbase. Wheelbase modifications are allowed only by sliding the suspension with the "AF" dimension affected accordingly (excess length behind the rear axle may be cut off as required). Any wheelbase modification shall result in a wheelbase and frame combination that is identical to one available from the manufacturer. |
| C. | Paint numbers are referenced only to identify colors. |
| COMMODITY NO. | DESCRIPTION |
| 070-700-106 | CHASSIS-CAB, SINGLE AXLE, CLASS 7, 33,000 LBS. GVWR (4x2) |
| MAKE: | International4200 SBA 4x2 |
| Western District | |
| CONTRACTOR | International |
| DISCOUNT* | ($480) |
| MODEL | 4200 SBA 4x2 |
| PRICE | $41,377.00 |
| Northern District | |
| CONTRACTOR | International |
| DISCOUNT* | ($318) |
| MODEL | 4200 SBA 4x2 |
| PRICE | $41,208.00 |
| Central District | |
| CONTRACTOR | International |
| DISCOUNT* | ($222) |
| MODEL | 4200 SBA 4x2 |
| PRICE | $41,108.00 |
| Southern District | |
| CONTRACTOR | International |
| DISCOUNT* | ($450) |
| MODEL | 4200 SBA 4x2 |
| PRICE | $41,346.00 |
| *Discount for Vehicle picked up by ordering Eligible User at Contractor's place of business. | |
| Approximate delivery time required ARO: | 90 |
| 070-700-106 | CHASSIS-CAB, SINGLE AXLE, CLASS 7, 33,000 LBS. GVWR (4x2) |
| OPTIONS: | |
| 1001 | Delay in warranty start date to allow for body installation. (Warranty to become effective when vehicle is placed in service rather than at time of delivery). |
| CODE | Up Date in Service Date by Customer |
| PRICE | N/C |
| 2001 | Power take-off (PTO) with a SAE standard, keyed output shaft, installed. To include a dash mounted electric-over-air switch and indicator light. Chelsea 440, Muncie TG Series or approved equivalent. For manual transmission only. State manufacturer and model no. bid. |
| MFR. | CHELSEA |
| MODEL NO. | 440 |
| CODE | CHELSEA 440 |
| PRICE | $617.00 |
| 070-700-106 | CHASSIS-CAB, SINGLE AXLE, CLASS 7, 33,000 LBS. GVWR (4x2) |
| 2002 | "Hot Shift" power take-off (PTO) with a SAE standard, keyed output shaft, installed. To include a dash mounted electric-over-hydraulic switch and indicator light. Chelsea 276, Muncie CS Series or approved equivalent. For automatic transmission only. State manufacturer and model no. bid. |
| MFR. | CHELSEA |
| MODEL NO. | 271 |
| CODE | CHELSEA 271 |
| PRICE | $1,000.00 |
| 2003 | Electronic PTO overspeed control. Chelsea, Muncie or approved equivalent. For automatic transmission only. State manufacturer and model no. bid. |
| MFR. | CHELSEA |
| MODEL NO. | EOS |
| CODE | CHELSEA EOS |
| PRICE | $354.00 |
| 2004 | Manual transmission, 6-speed minimum, with provisions for a PTO. Transmission must have a minimum low gear reduction of 9.01:1. Rear axle ratio shall be a 4.10/4.11 for 2400 RPM engines, 4.30/4.33 for 2500 RPM engines, 4.88/4.89 for 2800 RPM engines, or the closest possible ratio available that will provide a top speed of approximately 65 MPH. Transmission shall be filled with synthetic lubricant. State manufacturer and model no. bid. |
| MFR. | FULLER |
| MODEL NO | FS-6406N |
| CODE | 13GMS, 13WLA, 11LEG |
| PRICE (CREDIT) | -$5,163.00 |
| 2005 | Automatic transmission, 6-speed minimum (International may bid a 5-speed), with provisions for a PTO. Allison 3500RDS or approved equivalent. Bid in lieu of the 3000RDS in the base truck. State manufacturer and model no. bid. |
| MFR. | ALLISON |
| MODEL NO | ALLISON 3500_RDS_P |
| CODE | 13AGL |
| PRICE | N/C |
| FOR SUBSTANTIAL OFF ROAD USE, LOOSE DRY SAND, AND SPONGY SOIL OR LOOSE GRAVEL | |
| 3001 | "No-Spin" or driver control traction differential (DCDL) on rear axle. |
| CODE | 14877 |
| PRICE | $779.00 |
| 5001 | Rain shields over door windows, both sides. Auto Ventshade Co. (1-800-241-7219) or approved equivalent. Factory or dealer installed. |
| CODE | N/A |
| 6001 | Front clearance indicators. Factory or dealer installed. (Indicators shall be approximately 36 inches in length located on the left and right front corners of the vehicle.) |
| CODE | FRONT CLEARANCE INDICATORS |
| PRICE | $66.00 |
| 6201 | Automatic air brake drain system. ClearDrain System or approved equivalent. Bid in lieu of the air dryers specified in Section 62. G. Unit must be installed by the vehicle manufacturer. Dealer installed units are not acceptable. SEE SPECIFICATION ADS-1. |
| CODE | CLEARDRAIN |
| PRICE | $682.00 |
| 7001 | Tubeless radial tires with on/off highway tread for rear only. Bid four (4) 11R22.5G (14PR) or larger tires for on/off highway use and two (2) 11R22.5G (14PR) or larger tires for highway use. Rear tires to be Bridgestone M711, General D450, Goodyear G164 RTD, Michelin XDE or approved equivalent. |
| FRONT TIRE CODE | 2-7372130155 |
| REAR TIRE CODE | 4-7372130116 |
| PRICE | $85.00 |
| 8001 | Pintle hook, installed. To be swivel type and must have a capacity of 49,000 lbs. gross trailer weight and 9800 lbs. vertical load, minimum. Hook shall be installed no more than 14 inches forward from the end of the body as measured from the center of the eye. Holland Model PH-760, Wallace Model B30 or approved equivalent. State manufacturer and model no. bid. PURCHASER MUST SPECIFY BODY LENGTH AND TYPE (DUMP, STAKE, ETC.) IN ORDER FOR THE DEALER TO INSTALL THE PINTLE HOOK IN THE PROPER LOCATION. |
| MFR. | WALLACE |
| MODEL NO. | B-30 |
| CODE | WALLACE B-30 |
| PRICE | $354.00 |
| 8002 | Air brake package for straight truck and trailer. Full trailer air brake controls with air lines, glad hands and wiring routed to the rear end of the frame. |
| CODE | 04619, 08TMG, GLAD HANDS |
| PRICE | $374.00 |
| 8003 | Optional cab-axle dimension (CA) 102-105 inches. Minimum 1,740,000 in-lbs. RBM frame. |
| FRAME CODE | 01CAD |
| CA LENGTH | 102" |
| CA CODE | 01WEB |
| PRICE | N/C |
| 070-700-106 | CHASSIS-CAB, SINGLE AXLE, CLASS 7, 33,000 LBS. GVWR (4x2) |
| 8004 | Optional cab-axle dimension (CA) 108-113 inches. Minimum 1,740,000 in-lbs. RBM frame. |
| FRAME CODE | 01CAD |
| CA LENGTH | 108" |
| CA CODE | 01WEB |
| PRICE | N/C |
| 8005 | Optional cab-axle dimension (CA) 120-123 inches. Minimum 1,740,000 in-lbs. RBM frame. |
| FRAME CODE | 01CAD |
| CA LENGTH | 102" |
| CA CODE | 01WEC |
| PRICE | $70.00 |
| 8006 | Optional cab-axle dimension (CA) 126-129 inches. Minimum 1,740,000 in-lbs. RBM frame. |
| FRAME CODE | 01CAD |
| CA LENGTH | 127.9" |
| CA CODE | 01WEC |
| PRICE | $70.00 |
| 8007 | Optional cab-axle dimension (CA) 135-138 inches. Minimum 1,740,000 in-lbs. RBM frame. |
| FRAME CODE | 01CAD |
| CA LENGTH | 138" |
| CA CODE | 01WEC |
| PRICE | $70.00 |
| 8008 | Optional cab-axle dimension (CA) 141-144 inches. Minimum 1,740,000 in-lbs. RBM frame. |
| FRAME CODE | 01CAD |
| CA LENGTH | 141.9" |
| CA CODE | 01WEC |
| PRICE | $70.00 |
| 8009 | Optional cab-axle dimension (CA) 147-150 inches. Minimum 1,740,000 in-lbs. RBM frame. |
| FRAME CODE | 01CAD |
| CA LENGTH | 150" |
| CA CODE | 01WEC |
| PRICE | $70.00 |
| 8010 | Optional cab-axle dimension (CA) 153-156 inches. Minimum 1,740,000 in-lbs. RBM frame. |
| FRAME CODE | 01CAD |
| CA LENGTH | 153.9" |
| CA CODE | 01WEC |
| PRICE | $70.00 |
| 8011 | Optional cab-axle dimension (CA) 168-170 inches. Minimum 1,740,000 in-lbs. RBM frame. |
| FRAME CODE | 01CAD |
| CA LENGTH | 169" |
| CA CODE | 01WEC |
| PRICE | $70.00 |
| 8012 | Optional cab-axle dimension (CA) 186-188 inches. Minimum 1,740,000 in-lbs. RBM frame. |
| FRAME CODE | 01CAD |
| CA LENGTH | 187" |
| CA CODE | 01WED, 01SAL |
| PRICE | $228.00 |
| 8201 | Special state color. DOT Yellow (DuPont Centari L9069A, Freightliner/Sterling 3258, GM 86, International 4421). |
| CODE | 4421 |
| PRICE | N/C |
| 8202 | Two-tone colors. Manufacturer's standard two-tone colors. |
| CODE | 35200, 9219, 4421 |
| PRICE | $165.00 |