765-900-156 - WHEEL TRACTOR, UTILITY, CAB MODEL, MECHANICAL FRONT WHEEL DRIVE, 125 PTO HP @ 540 RPM, MINIMUM
|
NOTE: |
This detailed specification is not complete unless it is used in conjunction with all conditions of the Technical Specifications. |
|
ENGINE: |
Diesel engine, liquid or air-cooled. Dry type air cleaner, cold start aid, 12-volt electrical system, and standard exhaust system. |
|
PERFORMANCE: |
PTO HP shall be at exactly 540 RPM for the Equipment bid. Submit latest Nebraska Test reports with Bid, if available. If Nebraska Test reports have not yet been published or if the Equipment bid has not been Nebraska Tested, enclose with Bid the Manufacturer’s test data certifying compliance. |
|
PTO HP: _125 PTO HP |
|
|
FAILURE TO SUBMIT THIS DATA MAY RESULT IN THE BID BEING DISQUALIFIED |
|
|
DRIVETRAIN: |
Manufacturer's standard rear wheel drive with mechanical front wheel drive. Manufacturer’s standard transmission. Differential lock and steering brakes. State transmission type and speeds bid. |
|
TRANSMISSION TYPE:RANGE COMMAND SEMI-POWER SHIFT, SPEEDS: FORWARD _18__, REVERSE _6___ |
|
|
REAR PTO: |
Independent rear PTO. Output shaft shall be covered with a safety shield. |
|
CAB: |
Fully enclosed sound insulated cab with all the manufacturers' standard features. Cab shall include at a minimum: air conditioning, heater, front and rear window washer and wiper, and sun visor, if available. Must meet the latest issues of either OSHA Standards or SAE Requirements for ROPS (roll over protection structure). |
|
ACCESSORIES: |
Standard instrumentation and lighting system. Electric backup alarm, electric horn, deluxe suspension seat with safety belt and SMV (slow moving vehicle) emblem. Hydraulic controlled three-point hitch with linkage stabilizers. Standard drawbar. |
|
TIRES: |
Manufacturer’s standard R1 tread front tires and R1 tread rear tires. State tire sizes. |
|
TIRES: FRONT _14.9 R30 (RIW), REAR _18.4 R42 (RIW)____ |
|
|
PAINT: |
Manufacturer’s standard paint and color. |
|
CONDITIONS: |
Equipment offered must be completely assembled, including options/accessories and shall have been thoroughly tested and ready for operation. Equipment must be equipped with all Manufacturers’ standard components and accessories. It is preferred to have a PIN (Production Identification Number) system per the latest issue of SAE standards. At a minimum the Manufacturer’s standard warranty for state and municipalities shall be provided. A copy of the warranty shall be provided with the Bid. |
|
COMMODITY NO. |
DESCRIPTION |
|
765-900-156 |
WHEEL TRACTOR, UTILITY, CAB MODEL, MECHANICAL FRONTWHEEL DRIVE, 125 PTO HP @ 540 RPM, MINIMUM |
|
LEASING |
|
|
CONTRACTOR |
|
|
MAKE |
|
|
MODEL |
|
|
ITEM DESCRIPTION |
|
|
ANNUAL (12 MONTH) LEASE, INCLUDING ALL DELIVERY & MAINTENANCE: $_No Bid___________________ |
|
|
TWO YEAR(24 MONTH) LEASE, INCLUDING ALL DELIVERY & MAINTENANCE: $To be added later_ |
|
|
PURCHASE |
|
|
CONTRACTOR |
LANDIG TRACTOR COMPANY |
|
DISCOUNT* |
($300.00) |
|
MODEL |
TM155 (TM55B4/105) |
|
PRICE |
$61,621.00 |
|
*Discount for equipment picked up by ordering Eligible at Contractor's place of business |
|
|
TRACTOR NON-SPECIFIED OPTIONS |
|
|
Percentage discount off the current Manufacturer’s Suggested Retail Price for non-specified options for the model bid. The percentage discount is applied to the Manufacturer’s Suggested Retail Price to determine the actual price. |
|
|
Contractor's quotes shall include the appropriate MSRP pages |
|
|
DISCOUNT % |
10% |
|
CURRENT MSRP DATE |
9/1/2005 |
|
IMPLEMENTS/EQUIPMENT |
|
|
Percentage discount off the current Manufacturer’s Suggested Retail Price for non-specified implements/equipment offered by the tractor manufacturer for the model bid. The percentage discount is applied to the Manufacturer’s Suggested Retail Price to determine the actual price. |
|
|
Contractor's quotes shall include the appropriate MSRP pages |
|
|
DISCOUNT % |
10% |
|
CURRENT MSRP DATE |
1/1/2006 |
|
Approximate delivery time required ARO: |
150 |
|
765-900-156 |
WHEEL TRACTOR, UTILITY, CAB MODEL, MECHANICAL FRONTWHEEL DRIVE, 125 PTO HP @ 540 RPM, MINIMUM |
|
OPTIONS: |
|
|
1001 |
Optional transmissions for the model bid. State transmission type and speeds bid. |
|
TRANSMISSION TYPE: CREEPER FOR RANGE COMMAND_, SPEEDS: FORWARD __31_, REVERSE _12__ |
|
|
PRICE |
$1,363.00 |
|
TRANSMISSION TYPE: ____________________, SPEEDS: FORWARD _____, REVERSE _____ |
|
|
PRICE |
N/A |
|
TRANSMISSION TYPE: ____________________, SPEEDS: FORWARD _____, REVERSE _____ |
|
|
PRICE |
N/A |
|
1002 |
Optional front and rear tire combinations. |
|
TIRE COMBINATIONS: 16.9 R28 / 20.8 R38 (RIW)_____ |
|
|
PRICE |
$120.00 |
|
TIRE COMBINATIONS: _14.9 R28 / 18.4 R38 (R1)________ |
|
|
PRICE |
($677.00) |
|
TIRE COMBINATIONS: 14.9 R28 / 18.4 R38(RIW)_____ |
|
|
PRICE |
($360.00) |
|
TIRE COMBINATIONS: 16.9 R28 / 18.4 R42 (RIW)______ |
|
|
PRICE |
$75.00 |
|
TIRE COMBINATIONS: _______________________________ |
|
|
PRICE |
N/A |
|
1003 |
Front fenders. |
|
PRICE |
$373.00 |
|
1004 |
Quick disconnect front end loader with standard bucket. Loader package shall include all necessary hoses, valves, etc. Loader must be installed and ready for use when delivered. State model, bucket capacity and width. |
|
MODEL:________62 LBLR_______________________ |
|
|
BUCKET CAPACITY: 1.28 YD 3_, WIDTH: _84" HD___ |
|
|
PRICE |
$7,872.00 |
|
1005 |
Warning light, strobe (may be provided and installed by the dealer if not available from the Manufacturer). Four way flashing lights are not acceptable. |
|
PRICE |
$375.00 |
|
1006 |
Special state color, DOT Yellow (DuPont # L9069A) (may be dealer painted if factory painting is not available). NOTE: the entire unit, including options/accessories, shall be painted the same color. |
|
PRICE |
$750.00 |