760-960-110 - Tractor-Loader-Backhoe, Industrial, 70 Net HP
|
NOTE: |
This detailed specification is not complete unless it is used in conjunction with all conditions of the Technical Specifications. |
|
INTENDED USE: |
USED IN AWIDE RANGE OF CONSTRUCTION AND UTILITY APPLICATIONS. TRACTOR INCLUDES A BACKHOE WITH A 14 FOOT DIGGING DEPTH AND A 1.0 CUBIC YARD BUCKET FOR LOADING EXCAVATED MATERIAL. |
|
ENGINE: |
|
|
A. |
Diesel engine, minimum four cylinder, four cycle, liquid cooled, minimum 70 SAE Net HP, per the latest issue of SAE J1349. |
|
B. |
Displacement, minimum 4.4L. |
|
C. |
Permanent anti-freeze. |
|
D. |
Engine hourmeter. |
|
E. |
Standard exhaust. |
|
F. |
Dry type air cleaner with service (restriction) indicator. |
|
G. |
Hand and foot throttle. |
|
H. |
Minimum 12-volt electrical system, electric starter and a transmission neutral safety start device. |
|
DRIVE TRAIN: |
|
|
A. |
Power shift or power reversing transmission with at least four forward and four reverse speeds. |
|
B. |
Differential lock or torque proportioning rear differential. |
|
C. |
Standard rear wheel drive. |
|
D. |
Steering brakes. |
|
FRONT AXLE: |
Heavy-duty industrial type with fixed tread. |
|
STEERING: |
Power assist or hydrostatic power steering. |
|
LOADER: |
(Per latest issues of SAE J732 and J742): |
|
A. |
Minimum lift capacity of 5000 lbs. to full height. |
|
CAPACITY |
Briggs - 6,182 lbsRing Power - 5,453 lbs |
|
B. |
Minimum SAE breakout force of 8000 lbs. |
|
BREAKOUT (LBS.) |
Briggs - 9,164 lbsRing Power - 8,980 lbs |
|
C. |
Minimum digging depth of 5.0 inches. |
|
DIGGING DEPTH |
Briggs - 7.8 inchesRing Power - 6 inches |
|
D. |
Minimum reach of 28 inches at 42 degree dump angle. |
|
REACH |
Briggs - 28.2 inchesRing Power - 30 inches |
|
E. |
Minimum dump angle of 42 degrees. |
|
DUMP ANGLE |
Briggs - 45 DegreesRing Power - 45 Degrees |
|
F. |
Minimum dump clearance height of 8 feet 7 inches. |
|
DUMP CLEARANCE |
Briggs - 8 feet 8 inchesRing Power - 8 feet 7 inches |
|
G. |
Minimum bucket width of 82 inches. |
|
BUCKET WIDTH |
Briggs - 82 inchesRing Power - 89 inches |
|
H. |
Minimum 1.00 cubic yard bucket (SAE heaped). |
|
CAPACITY (CU YD) |
Briggs - 1.03 Cubic YardRing Power - 1 Cubic Yard |
|
I. |
Lift arm support device (refer to SAE J38). |
|
J. |
Single lever loader control with a self-leveling feature. |
|
K. |
Automatic return-to-dig. |
|
BACKHOE: |
|
|
A. |
Minimum SAE digging depth, 2 foot level bottom of 14 feet. |
|
DIGGING DEPTH |
Briggs - 14 feet 2 inchesRing Power - 14 feet 5 inches |
|
B. |
Minimum reach from the swing pivot of 17 feet 5 inches. |
|
REACH |
Briggs - 17 feet 10 inchesRing Power - 18 feet 6 inches |
|
C. |
Minimum truck loading height of 10 feet. |
|
LOADING HEIGHT |
Briggs - 11 feet 2 inchesRing Power - 11 feet 10 inches |
|
D. |
Minimum bucket digging force of 11,000 lbs. |
|
BUCKET FORCE |
Briggs - 11,212 lbsRing Power - 11,702 lbs |
|
E. |
Minimum dipper digging force of 7000 lbs. |
|
DIPPER FORCE |
Briggs - 7,049 lbsRing Power - 7,841 lbs |
|
F. |
Minimum 24 inch wide heavy-duty trenching bucket with teeth. |
|
ROPS/FOPS CAB: |
Fully enclosed cab, sound insulated with integral ROPS (roll over protective structure) and FOPS (falling object protective structure), per latest issues of SAE J397, J1040 and SAE J231, fully certified. To include air conditioning, heater, defroster, tinted safety glass, suspension seat and lockable doors. |
|
ACCESSORIES: |
|
|
A. |
Gauges/Indicators: Engine tachometer, engine hourmeter, fuel, engine coolant, engine oil pressure, charging system, and transmission oil temperature (if so equipped). |
|
B. |
Work light(s), headlights, taillight(s), warning (flashing) lights/turn signals (may be provided and installed by the contractor, if not available from the manufacturer), and instrument panel light(s). |
|
C. |
Rear fenders. |
|
D. |
Tool box, lockable. |
|
E. |
Manual master battery disconnect switch. |
|
F. |
Safe access to machine and servicing points in accordance with the latest issue of SAE J185. Safety signs per the latest issue of SAE J115. |
|
G. |
Provisions to prevent unauthorized starting or movement of the machine, per the latest issue of SAE J1083. |
|
H. |
Self-adjusting volume back-up alarm (may be provided and installed by the contractor, if not available from the manufacturer), per the latest issue of SAE J994. |
|
I. |
SMV (Slow Moving Equipment) emblem mounted on rear of the machine (may be provided and installed by the contractor, if not available from the manufacturer), per the latest issue of SAE J943. |
|
J. |
Warning horn (may be provided and installed by the contractor, if not available from the manufacturer), per the latest issue of SAE J1105. |
|
K. |
Seat belt with metal-to-metal fasteners, per the latest issue of SAE J386. |
|
TIRES: |
|
|
A. |
Front: Manufacturer's standard F3 tread. |
|
MANUFACTURER |
Briggs - GoodyearRing Power - Not specified |
|
SIZE & DESIGNATION |
Briggs - 11Lx16.5, 10PR (F3)Ring Power - F3 Tread |
|
B. |
Rear: Manufacturer's standard R4 tread. |
|
MANUFACTURER |
Briggs - GoodyearRing Power - Not specified |
|
SIZE & DESIGNATION |
Briggs - 17.5Lx24, 10 PR (R4)Ring Power - R4 Tread |
|
PAINT: |
Manufacturer's standard paint and color, factory painted. |
|
CONDITIONS: |
|
|
A. |
At a minimum, the Manufacturer’s standard warranty for state and municipalities shall be provided. A copy of the warranty shall be provided with the bid. |
|
B. |
The Contractor shall provide any and all non-specified features or components necessary in order to provide a complete unit. |
|
COMMODITY NO. |
DESCRIPTION |
|
760-960-110 |
TRACTOR-LOADER-BACKHOE, INDUSTRIAL, 70 NET HP, MINIMUM |
|
Total Cost of Ownershipwith Guaranteed Maintenance and Repurchase |
|
|
LIFE CYCLE ANALYSIS |
|
|
Contractor |
RING POWER CORPORATION |
|
Model |
CATERPILLAR 416D |
|
Price |
1. Price per general specifications with factory warranty:$48,834.00 each |
|
2. Guaranteed maintenance, from receiving date through five (5) years or 5000 hours of operation, whichever occurs first:$1,500.00 each |
|
|
3. Guaranteed repurchase price at the end of five (5) years or 5000 hours of operation, whichever occurs first:$26,000.00 each |
|
|
ATTENTION:TCO is a method of acquisition requiring the initial purchase of the equipment (Item #1), providing a maintenance ceiling price (#2), and a guaranteed repurchase price (#3).Please see the Contract, Section 1.16 Basis for Award, for specific details. |
|
|
Annual Leasing |
|
|
Contractor |
Briggs Equipment |
|
Make: |
Case |
|
Model |
580M series IIhttp://www.casece.com/products/products_detail.asp?RL=NAE&ID=2782 |
|
Item Description |
Tractor Loader Backhoe |
|
Annual (12 month) Lease, including all delivery & Maintenance: $16,740.00 |
|
|
ATTENTION:State Agencies must obtain PRIOR lease approval from the Florida Department of Financial Services BEFORE the leasing of equipment! |
|
|
Monthly Leasing |
|
|
Contractor |
RING POWER CORPORATION |
|
Make: |
CATERPILLAR |
|
Model |
416Dhttp://cmms.cat.com/cmms/servlet/cat.dcs.cmms.servlet.ImageServlet?imageid=C049913&imageType=2 |
|
Item Description |
LOADER BACKHOE |
|
Monthly Lease, including all delivery & Maintenance:$1,300.00 |
|
|
ATTENTION:State Agencies must obtain PRIOR lease approval from the Florida Department of Financial Services BEFORE the leasing of equipment! |
|
|
Purchase |
|
|
Contractor |
RING POWER CORPORATION |
|
Discount* |
0.002% |
|
Model |
CATERPILLAR 416Dhttp://cmms.cat.com/cmms/servlet/cat.dcs.cmms.servlet.ImageServlet?imageid=C049913&imageType=2 |
|
Price |
$42,212.00 |
|
Percentage discount off the current Manufacturer’s Suggested Retail Price for non-specified options for the model bid. The percentage discount is applied to the Manufacturer’s Suggested Retail Price to determine the actual price of an option. |
|
|
DISCOUNT % |
41.40% |
|
CURRENT MSRP DATE |
5/2/2005 |
|
*Discount for equipment picked up by ordering Eligible User at Contractor’s place of business. |
|
|
Approximate delivery time required ARO: |
60 Days |
|
Note to users:Options are listed for the purchase of this equipment only!Purchasers needing options for lease equipment or Total Cost acquisitions are to negotiate option prices with Contractors. |
|
|
760-960-110 |
TRACTOR-LOADER-BACKHOE, INDUSTRIAL, 70 NET HP, MINIMUM |
|
OPTIONS: |
|
|
1001 |
Diesel engine, minimum four cylinder, four cycle, liquid cooled, minimum 80 SAE Net HP, per the latest issue of SAE J1349. |
|
PRICE |
INCLUDED, N/C |
|
1002 |
High efficiency bypass oil purification system. This system is designed to reduce or eliminate engine oil changes and extend its useful life. The Puradyn Oil Filtration System or approved equivalent. Puradyn Filter Technologies, Inc. 1-800-488-0577. |
|
PRICE |
N/A |
|
1003 |
Mechanical front wheel drive. Note to bidder: Provide only the difference in price between the two wheel drive model and the mechanical front wheel drive model offered. |
|
PRICE |
$5,061.00 |
|
1004 |
High efficiency bypass oil purification system. This system is designed to reduce or eliminate hydraulic oil changes and extend its useful life. The Puradyn Oil Filtration System or approved equivalent. Puradyn Filter Technologies, Inc. 1-800-488-0577. |
|
PRICE |
N/A |
|
1005 |
Automatic lubrication system. System shall consist of an electronically operated pump metering Class 2 lubricant to each lubrication point. Groeneveld, Vogel Automatic Lubrication System of approved equivalent. Groeneveld Atlantic South, Inc. (813) 626-5600, Vogel Lubrication, Inc. (757) 380-8585, email: vogel@vogel-lube.com. |
|
PRICE |
$7,032.00 |
|
1006 |
2 or 4 post ROPS and FOPS canopy in lieu of fully enclosed cab. |
|
PRICE (CREDIT) |
($5,607.00) |
|
1007 |
Delete air conditioner in fully enclosed cab. |
|
PRICE (CREDIT) |
N/A |
|
1008 |
Special state color, DOT Yellow, Federal Yellow No. 13538, DuPont #L9069A, ACME No. 2712, Deere No. PT102, or approved equivalent, (may be Contractor painted if factory painting is not available). NOTE: The entire unit, including options, shall be painted the same color. |
|
PRICE |
$3,914.00 |