760-960-100 - Tractor-Loader, Industrial, 70 Net HP
|
NOTE: |
This detailed specification is not complete unless it is used in conjunction with all conditions of the Technical Specifications. |
|
INTENDED USE: |
USED IN AWIDE RANGE OF CONSTRUCTION, UTILITY AND FARMING APPLICATIONS. |
|
ENGINE: |
|
|
A. |
Diesel engine, minimum four cylinder, four cycle, liquid cooled, minimum 73 SAE Net HP, per the latest issue of SAE J1349. |
|
B. |
Displacement, minimum 3.9L. |
|
C. |
Permanent anti-freeze. |
|
D. |
Engine hourmeter. |
|
E. |
Standard exhaust. |
|
F. |
Dry type air cleaner with service (restriction) indicator. |
|
G. |
Hand and foot throttle. |
|
H. |
Minimum 12-volt electrical system, electric starter and a transmission neutral safety start device. |
|
DRIVE TRAIN: |
|
|
A. |
Power shift or power reversing transmission with at least four forward and four reverse speeds. |
|
B. |
Differential lock or torque proportioning rear differential. |
|
C. |
Standard rear wheel drive. |
|
D. |
Steering brakes. |
|
FRONT AXLE: |
Heavy-duty industrial type with fixed tread. |
|
STEERING: |
Power assist or hydrostatic power steering. |
|
PERFORMANCE ITEMS: |
(Per latest issues of SAE J732 and J742): |
|
A. |
Minimum lift capacity of 4400 lbs. to full height. |
|
CAPACITY |
Briggs - 6,503 lbsNortrax - 5,280 lbs |
|
B. |
Minimum SAE breakout force of 7500 lbs. |
|
BREAKOUT (LBS.) |
Briggs - 9,271 lbsNortrax - 7,900 |
|
C. |
Minimum digging depth of 5.0 inches. |
|
DIGGING DEPTH |
Briggs - 7 feet 8 inchesNortrax - 9 feet 6 inches |
|
D. |
Minimum reach of 25 inches at 42 degree dump angle. |
|
REACH |
Briggs - 25.9 inchesNortrax - 34.4 inches |
|
E. |
Minimum dump angle of 42 degrees. |
|
DUMP ANGLE |
Briggs - 45 DegreesNortrax - 45 Degrees |
|
F. |
Minimum dump clearance height of 8 feet 4 inches. |
|
DUMP CLEARANCE |
Briggs - 8 feet 8 inchesNortrax - 8 feet 4.6 inches |
|
G. |
Minimum bucket width of 82 inches. |
|
BUCKET WIDTH |
Briggs - 82 inchesNortrax - 86 inches |
|
LOADER: |
|
|
A. |
Minimum 1.00 cubic yard bucket (SAE heaped). |
|
CAPACITY (CU YD) |
Briggs - 1.03 Cubic YardNortrax - 1 Cubic Yard |
|
B. |
Lift arm support device (refer to SAE J38). |
|
C. |
Single lever loader control with a self-leveling feature. |
|
D. |
Tractor-loader to be integral. No add-on or agriculture type loaders. |
|
E. |
Automatic return-to-dig. |
|
COUNTERWEIGHT: |
Maximum rear counterweight and/or rear wheel weights available from manufacturer must be installed on machine when delivered. Also, calcium chloride (CaC12) in rear tires (only), 90% full. Total counterweight must be sufficient for safe operation and adequate performance. State type of counterweight(s) bid, mounting point(s), total number, and total weight added, including mounts. |
|
TYPE |
Briggs - 3-point hitch integralNortrax - Rear Weight Slabs under tractor plus CaCl2 in tires |
|
MOUNTING |
Briggs - Rear MountNortrax - Bolted to bottom of three point hitch frame |
|
TOTAL NO. |
Briggs - 4 (four)Nortrax - 3 Slab Weights |
|
WEIGHT (LBS.) |
Briggs - 800 lbsNortrax - 535 lbs |
|
ROPS: |
A 2 or 4 post roll over protective structure with canopy shall be provided. Must conform to the latest issue of SAE J1040C and J1043 (FOPS). |
|
ACCESSORIES: |
|
|
A. |
Gauges/Indicators: Engine tachometer, engine hourmeter, fuel, engine coolant, engine oil pressure, charging system, and transmission oil temperature (if so equipped). |
|
B. |
Work light(s), headlights, taillight(s), warning (flashing) lights/turn signals (may be provided and installed by the contractor, if not available from the manufacturer), and instrument panel light(s). |
|
C. |
Rear fenders. |
|
D. |
Hydraulic controlled category I and II, three-point hitch and linkage with position control and linkage stabilizers. |
|
E. |
Swinging or fixed drawbar, with provisions for safety chains. |
|
F. |
Tool box, lockable. |
|
G. |
Manual master battery disconnect switch. |
|
H. |
Safe access to machine and servicing points in accordance with the latest issue of SAE J185. Safety signs per the latest issue of SAE J115. |
|
I. |
Provisions to prevent unauthorized starting or movement of the machine, per the latest issue of SAE J1083. |
|
J. |
Self-adjusting volume back-up alarm (may be provided and installed by the contractor, if not available from the manufacturer), per the latest issue of SAE J994. |
|
K. |
SMV (Slow Moving Equipment) emblem mounted on rear of the machine (may be provided and installed by the contractor, if not available from the manufacturer), per the latest issue of SAE J943. |
|
L. |
Warning horn (may be provided and installed by the contractor, if not available from the manufacturer), per the latest issue of SAE J1105. |
|
M. |
Deluxe suspension seat with foam padding and a backrest. |
|
N. |
Seat belt with metal-to-metal fasteners, per the latest issue of SAE J386. |
|
TIRES: |
|
|
A. |
Front: Manufacturer's standard F3 tread. |
|
MANUFACTURER |
Briggs - GoodyearNortrax - Goodyear or Firestone |
|
SIZE & DESIGNATION |
Briggs - 11Lx16, 10PR (F3)Nortrax - 12-16.5 *PR Traction |
|
B. |
Rear: Manufacturer's standard R4 tread. |
|
MANUFACTURER |
Briggs - GoodyearNortrax - Goodyear or Firestone |
|
SIZE & DESIGNATION |
Briggs - 17.5Lx24, 10PRNortrax - 16.9X24 8PR R4 |
|
PAINT: |
Manufacturer's standard paint and color, factory painted. |
|
CONDITIONS: |
|
|
A. |
At a minimum, the Manufacturer’s standard warranty for state and municipalities shall be provided. A copy of the warranty shall be provided with the bid. |
|
B. |
The Contractor shall provide any and all non-specified features or components necessary in order to provide a complete unit. |
|
COMMODITY NO. |
DESCRIPTION |
|
760-960-100 |
TRACTOR-LOADER, INDUSTRIAL, 70 NET HP, 4400 LBS. LIFT CAPACITY, MINIMUM |
|
Total Cost of Ownershipwith Guaranteed Maintenance and Repurchase |
|
|
LIFE CYCLE ANALYSIS |
|
|
Contractor |
Nortrax Equipment Company SE LP |
|
Model |
DEERE 210 LE |
|
Price |
1. Price per general specifications with factory warranty:$40,126.80 each |
|
2. Guaranteed maintenance, from receiving date through five (5) years or 5000 hours of operation, whichever occurs first:$2,750.00 each |
|
|
3. Guaranteed repurchase price at the end of five (5) years or 5000 hours of operation, whichever occurs first:$13,190.00 each |
|
|
ATTENTION:TCO is a method of acquisition requiring the initial purchase of the equipment (Item #1), providing a maintenance ceiling price (#2), and a guaranteed repurchase price (#3).Please see the Contract, Section 1.16 Basis for Award, for specific details. |
|
|
Leasing |
|
|
Contractor |
Briggs Equipment |
|
Make: |
Case |
|
Model |
570M XThttp://www.casece.com/products/products_detail.asp?RL=NAE&ID=75 |
|
Item Description |
Tractor-Loader |
|
Annual (12 month) Lease, including all delivery & Maintenance: $17,820.00 |
|
|
Monthly Lease, including all delivery & Maintenance:$1,650.00 |
|
|
ATTENTION:State Agencies must obtain PRIOR lease approval from the Florida Department of Financial Services BEFORE the leasing of equipment! |
|
|
Purchase |
|
|
Contractor |
Briggs Equipment |
|
Discount* |
$150 |
|
Model |
570M XThttp://www.casece.com/products/products_detail.asp?RL=NAE&ID=75 |
|
Price |
$34,965.00 |
|
Percentage discount off the current Manufacturer’s Suggested Retail Price for non-specified options for the model bid. The percentage discount is applied to the Manufacturer’s Suggested Retail Price to determine the actual price of an option. |
|
|
DISCOUNT % |
30% |
|
CURRENT MSRP DATE |
1-Apr-05 |
|
*Discount for equipment picked up by ordering Eligible User at Contractor’s place of business. |
|
|
Approximate delivery time required ARO: |
90 Days |
|
Note to users:Options are listed for the purchase of this equipment only!Purchasers needing options for lease equipment or Total Cost acquisitions are to negotiate option prices with Contractors. |
|
|
760-960-100 |
TRACTOR-LOADER, INDUSTRIAL, 70 NET HP, 4400 LBS. LIFT CAPACITY, MINIMUM |
|
OPTIONS: |
|
|
1001 |
Diesel engine, minimum four cylinder, four cycle, liquid cooled, minimum 80 SAE Net HP, per the latest issue of SAE J1349. |
|
PRICE |
$1,634.00 |
|
1002 |
High efficiency bypass oil purification system. This system is designed to reduce or eliminate engine oil changes and extend its useful life. The Puradyn Oil Filtration System or approved equivalent. Puradyn Filter Technologies, Inc. 1-800-488-0577. |
|
PRICE |
$975.00 |
|
1003 |
Mechanical front wheel drive. Note to bidder: Provide only the difference in price between the two wheel drive model and the mechanical front wheel drive model offered. |
|
PRICE |
$5,480.00 |
|
1004 |
High efficiency bypass oil purification system. This system is designed to reduce or eliminate hydraulic oil changes and extend its useful life. The Puradyn Oil Filtration System or approved equivalent. Puradyn Filter Technologies, Inc. 1-800-488-0577. |
|
PRICE |
$975.00 |
|
1005 |
Box scraper, 6 feet wide, with siz (6) teeth minimum, manual vertical adjustment, and hinged rear blade. Gannon Landscaper 220 or approved equivalent. |
|
MFR. & MODEL NO. |
Gannon 220 |
|
PRICE |
$2,100.00 |
|
1006 |
Hydraulic controlled scarifier, Gannon 4X2, HD 4280 HB or approved equivalent. Shall include any valves, hoses, etc. Unit must be mounted and ready for use when delivered. |
|
MFR. & MODEL NO. |
Gannon HD4280HB |
|
PRICE |
$2,500.00 |
|
1007 |
Rear grader blade, reversible, with manual angle adjust, 6 feet wide, minimum. |
|
PRICE |
$639.00 |
|
1008 |
Special state color, DOT Yellow, Federal Yellow No. 13538, DuPont #L9069A, ACME No. 2712, Deere No. PT102, or approved equivalent, (may be Contractor painted if factory painting is not available). NOTE: The entire unit, including options, shall be painted the same color. |
|
PRICE |
$3,863.00 |