760-900-320 - Crawler Tractor, Low Ground Pressure, 90 Net HP
|
NOTE: |
NOTE: This detailed specification is not complete unless it is used in conjunction with all conditions of the Technical Specifications. |
|
INTENDED USE: |
USED IN ALL TYPES OF LAND CLEARING AND CONSTRUCTION APPLICATIONS. |
|
ENGINE: |
|
|
A. |
Diesel engine, four or six cylinder, four cycle, liquid cooled, minimum 90 SAE Net HP, per the latest issue of SAE J1349. |
|
B. |
Displacement, minimum 3.9L |
|
C. |
Permanent anti-freeze. |
|
D. |
Radiator core protective grid (sand shield), or anti-blast radiator core, if available. |
|
E. |
Engine hour meter. |
|
F. |
Vertical exhaust with rain cap or curved exhaust pipe. |
|
G. |
Dry type air cleaner, precleaner or automatic dust evacuator and service (restriction) indicator. |
|
H. |
Reversible or blower (ejector) fan. |
|
ELECTRICAL: |
|
|
A. |
Direct electric starting system, 12-volt minimum, with manual master battery disconnect switch. |
|
B. |
Minimum 12-volt electrical system per the latest issue of SAE J821. |
|
C. |
Gauges and indicators: Visual hydraulic oil level indicator, and gauges for fuel, coolant temperature, engine oil pressure, charging system and transmission oil temperature. Or, preferably, an electronic monitor for fluid levels and temperatures. |
|
DRIVELINE: |
Direct drive or power shift transmission with torque converter, with a minimum of three forward and three reverse speeds, or hydrostatic drive. |
|
UNDERCARRIAGE: |
|
|
A. |
Track gauge of 70 inches, minimum. |
|
B. |
Single grouser centered track shoes of 24 inches, minimum width. |
|
C. |
Length of track on ground of 85 inches, minimum. |
|
D. |
Hydraulic track adjusters designed for maximum safety. |
|
E. |
Track rollers, six (6) per side, minimum. |
|
F. |
Permanent (metal-to-metal) face type seals on track rollers, track idlers and track carrier rollers. |
|
G. |
Sealed and lubricated track. |
|
H. |
Track guides, front and rear. |
|
I. |
Track roller frames and front idlers to be heavy-duty type, capable of continuous use per application in scope. |
|
CHASSIS: |
|
|
A. |
Rigid type drawbar hitch mounted to the rear of the machine. |
|
B. |
Heavy-duty full length belly pan, if available. Must provide protection for crankcase, transmission and all other bottom mounted components. (NOTE: Belly pan may be omitted under transmission, if Manufacturer warrants transmission case to act as belly pan.) |
|
C. |
Front tow hook. Mounted in most accessible location possible. |
|
D. |
Vandalism protection group. Include locks or protection for all exposed hydraulic, fuel, coolant and oil fluid caps, gauges and instruments, engine, battery and other vulnerable components. |
|
E. |
Hydraulic inside or outside arm “C” frame with power angle and tilt blade, installed. All hydraulic lines and tubes to be adequately secured guarded or located to provide maximum protection from brush and limbs. |
|
F. |
Blade shall be a minimum of 111 inches wide and 32 inches high. |
|
G. |
Minimum blade capacity, per SAE J1265, shall be 2.3 cu. yd. |
|
ROPS/FOPS CAB: |
Fully enclosed cab, sound insulated with integral ROPS (roll over protective structure) and FOPS (falling object protective structure), per latest issues of SAE J397, J1040 and SAE J231, fully certified. To include air conditioning, heater, defroster, tinted safety glass, suspension seat and lockable doors. |
|
PERFORMANCE: |
|
|
A. |
Overall machine height (tip of grouser to highest point) of 9 feet 6 inches, maximum. |
|
B. |
Ground clearance per latest issue of SAE J1234 of 12 inches, minimum. |
|
C. |
Total advertised machine operating weight, as defined in the latest issue of SAE J1234, and equipped with all Manufacturer’s standard Equipment including a ROPS canopy, plus a straight, or semi-U bulldozer blade with hydraulic power tilt (or a power angle tilt, or power angle tilt and pitch bulldozer blade) and the necessary hydraulic controls, shall be a minimum of 19,000 lbs. The maximum ground pressure based on the same advertised operating weight shall be 4.70 psi. |
|
SAFETY ITEMS: |
|
|
A. |
Self-adjusting volume backup alarm, per latest issue of SAE J994. |
|
B. |
Warning horn, per the latest issue of SAE J1105. |
|
C. |
Service braking system, secondary stopping system, and parking system, per latest issue of SAE J1026. |
|
D. |
Self-cleaning anti-skid surfaces and handgrips as needed for safely mounting, operating and dismounting the machine and for all maintenance operations normally performed once each week, per the latest issue of SAE J185. Safety signs per the latest issue of SAE J115. |
|
E. |
Rearview mirror. |
|
F. |
Provisions to prevent unauthorized starting, or movement of machine, per latest issue of SAE J1083. |
|
G. |
Seat belts with metal-to-metal fasteners, per latest issue of SAE J386. |
|
PAINT: |
Manufacturer’s standard paint and color, factory painted. |
|
CONDITIONS: |
|
|
A. |
The services of a factory technician, thoroughly trained in the use and operation of the unit, shall be furnished for a period of not less than one (1) day and up to (2) days, if requested by the Eligible User, to instruct personnel in the use, operation and maintenance of the unit after delivery. This is to be done at the delivery location. |
|
B. |
At a minimum, the Manufacturer's standard warranty for state and municipalities shall be provided. A copy of the warranty shall be provided with the bid. |
|
C. |
The Contractor shall provide any and all non-specified features or components necessary in order to provide a complete unit. |
|
COMMODITY NO. |
DESCRIPTION |
|
760-900-320 |
CRAWLER TRACTOR, LOW GROUND PRESSURE, 90 NET HP |
|
Total Cost of Ownershipwith Guaranteed Maintenance and Repurchase |
|
|
LIFE CYCLE ANALYSIS |
|
|
Contractor |
RING POWER CORPORATION |
|
Model |
CATERPILLAR D5C LGP |
|
Price |
1. Price per general specifications with factory warranty:$98,244.00 each |
|
2. Guaranteed maintenance, from receiving date through five (5) years or 5000 hours of operation, whichever occurs first:$21,700.00 each |
|
|
3. Guaranteed repurchase price at the end of five (5) years or 5000 hours of operation, whichever occurs first:$50,000.00 each |
|
|
ATTENTION:TCO is a method of acquisition requiring the initial purchase of the equipment (Item #1), providing a maintenance ceiling price (#2), and a guaranteed repurchase price (#3).Please see the Contract, Section 1.16 Basis for Award, for specific details. |
|
|
Leasing |
|
|
Contractor |
Briggs Equipment |
|
Make: |
Case |
|
Model |
850K LGPhttp://www.casece.com/products/products_detail.asp?RL=NAE&ID=2590 |
|
Item Description |
Crawler Tractor, LGP |
|
Annual (12 month) Lease, including all delivery & Maintenance: $44,820.00 |
|
|
Monthly Lease, including all delivery & Maintenance:$4,150.00 |
|
|
ATTENTION:State Agencies must obtain PRIOR lease approval from the Florida Department of Financial Services BEFORE the leasing of equipment! |
|
|
Purchase |
|
|
Contractor |
RING POWER CORPORATION |
|
Discount* |
0.002% |
|
Model |
CATERPILLAR D5G LGPhttp://www.cat.com/cda/layout?m=37840&x=7 |
|
Price |
$89,789.00 |
|
Percentage discount off the current Manufacturer’s Suggested Retail Price for non-specified options for the model bid. The percentage discount is applied to the Manufacturer’s Suggested Retail Price to determine the actual price of an option. |
|
|
DISCOUNT % |
37.50% |
|
CURRENT MSRP DATE |
5/20/2005 |
|
*Discount for equipment picked up by ordering Eligible User at Contractor’s place of business. |
|
|
Approximate delivery time required ARO: |
120 Days |
|
Note to users:Options are listed for the purchase of this equipment only!Purchasers needing options for lease equipment or Total Cost acquisitions are to negotiate option prices with Contractors. |
|
|
760-900-320 |
CRAWLER TRACTOR, LOW GROUND PRESSURE, 90 NET HP |
|
OPTIONS: |
|
|
1001 |
High efficiency bypass oil purification system. This system is designed to reduce or eliminate engine oil changes and extend its useful life. The Puradyn Oil Filtration System or approved equivalent. Puradyn Filter Technologies, Inc. 1-800-488-0577. |
|
PRICE |
N/A |
|
1002 |
High efficiency bypass oil purification system. This system is designed to reduce or eliminate hydraulic oil changes and extend its useful life. The Puradyn Oil Filtration System or approved equivalent. Puradyn Filter Technologies, Inc. 1-800-488-0577. |
|
PRICE |
N/A |
|
1003 |
Automatic lubrication system. System shall consist of an electronically operated pump metering Class 2 lubricant to each lubrication point. Groeneveld, Vogel Automatic Lubrication System of approved equivalent. Groeneveld Atlantic South, Inc. (813) 626-5600, Vogel Lubrication, Inc. (757) 380-8585, email: vogel@vogel-lube.com. |
|
PRICE |
$4,076.00 |
|
1004 |
ROPS canopy in lieu of fully enclosed cab. |
|
PRICE (CREDIT) |
($9,475.00) |
|
1005 |
Special state color, DOT Yellow, Federal Yellow No. 13538, DuPont #L9069A, ACME No. 2712, Deere No. PT102, or approved equivalent, (may be Contractor painted if factory painting is not available). NOTE: The entire unit, including options, shall be painted the same color. |
|
PRICE |
$3,989.00 |