760-840-420 - Hydraulic Excavator, Hoe Type, Crawler Mounted, 44,000 Lbs. Operating Weight, Minimum
|
NOTE: |
This detailed specification is not complete unless it is used in conjunction with all conditions of the Technical Specifications. |
|
INTENDED USE: |
USED FOR SITE PREPARATION, DITCH CLEANING AND DIGGING BORROW PITS IN REMOTE AREAS THAT ARE NOT ACCESSIBLE WITH RUBBER TIRED MACHINES. |
|
PERFORMANCE: |
|
|
A. |
Drawbar pull of 39,000 lbs., minimum. |
|
B. |
Travel height of complete machine (tip of grouser to highest point) not to exceed 10 feet, and travel width of complete machine not to exceed 10 feet 6 inches. (Note to user: Use caution when transporting on either a level deck or drop deck lowboy, because of overall travel height.) |
|
C. |
360 degree continuous swing, left and right. |
|
D. |
Lift capacity over side or end, at a 20 foot radius, 5 feet above ground level, per the latest issue of SAE J1097, and 8,500 lbs., minimum. |
|
E. |
Dimensions, with the base bucket, arm (“stick”) and boom in a single adjustment position, per the latest issue of SAE J1193: |
|
(a) Swing clearance, rear of upper structure (i.e. tail swing), 9 feet 6 inches, maximum. |
|
|
(b) Ground clearance per latest issue of SAE J1234, 17 inches minimum. |
|
|
(c) Maximum radius at groundline (i.e. surface reach) 31 feet 6 inches, minimum. |
|
|
(d) Maximum digging depth, 21 feet 6 inches, minimum. |
|
|
F. |
Total advertised machine operating weight, per the latest issue of SAE J1234, of 44,000 lbs. minimum. |
|
G. |
Forces, per the latest issue of SAE J1179: |
|
(a) Rated bucket tangential force, 27,500 lbs., minimum. |
|
|
(b) Rated arm force, 21,000 lbs., minimum. |
|
|
ENGINE: |
|
|
A. |
Diesel engine, six cylinder, four cycle, liquid cooled, minimum 130 SAE Net HP, per the latest issue of SAE J1349. |
|
B. |
Displacement, minimum 5.7L. |
|
C. |
Permanent anti-freeze. |
|
D. |
Engine hourmeter. |
|
E. |
Standard exhaust. |
|
F. |
Dry type air cleaner with service (restriction) indicator. |
|
G. |
Reversible or blower (ejector) fan. |
|
TRACK DRIVE: |
|
|
A. |
Hydraulic drive. |
|
B. |
Each track shall be independently driven. |
|
C. |
Brakes shall be provided on each track. Manufacturer’s standard travel and parking brakes. |
|
UNDERCARRIAGE: |
|
|
A. |
Undercarriage to be a conventional, dual tracked crawler type. |
|
B. |
Triple grouser track shoes, symmetrical (i.e. not offset), minimum 31 inches wide. |
|
C. |
Overall length of track to be 14 feet 6 inches, minimum. |
|
D. |
Hydraulic track adjuster designed for maximum safety. |
|
E. |
Permanent (metal-to-metal) face type seals on track rollers, track idlers, sprockets, and track carrier rollers. |
|
F. |
Sealed track (conical metal washer seals). Or, sealed and lubricated track. |
|
CAB: |
|
|
A. |
Fully enclosed cab, sound insulated with FOGS (falling object guards, per latest issue of SAE J1356 and ISO 10262), fully certified. To include air conditioning, heater, defroster, tinted safety glass and suspension seat. |
|
B. |
Factory installed charging, engine oil pressure and coolant temperature gauges. Or, an electronic monitoring system for as many of these functions as possible, with gauges for the remainder. |
|
C. |
Cab assist handle(s) at each door. |
|
CHASSIS: |
|
|
A. |
Front and rear tow hook(s), tow pin(s), or tow eye(s). |
|
B. |
Heavy-duty hoe type bucket with teeth and side cutters, minimum 46 inches side cutting width (with side cutters), with an SAE heaped capacity of 1.05 cubic yards. |
|
C. |
Vandal protection, including locks for cab door(s), engine and other service compartments, and exposed (outside of locked cab or locked compartments) battery box and fluid caps. |
|
D. |
One-piece (“gooseneck”) boom. |
|
E. |
Hydraulic system to provide independent swing and travel. |
|
ELECTRICAL: |
|
|
A. |
Direct electric starting system, 24-volt, minimum. |
|
B. |
Minimum 24-volt electrical system, per latest issue of SAE J821. |
|
C. |
Manual master battery disconnect switch. |
|
SAFTEY ITEMS: |
|
|
A. |
Windshield wiper(s). |
|
B. |
Rear view mirror(s). |
|
C. |
Electric travel alarm, per the latest issue of SAE J994, for travel in either to direction. |
|
D. |
Warning horn, per the latest issue of SAE J1105. |
|
E. |
Safe access to machine cab and servicing points to be in accordance with the latest issue of SAE J185. |
|
F. |
Safety signs per latest issue of SAE J115. |
|
G. |
Provisions to prevent unauthorized starting or movement of machines, per latest issue of SAE J1083. |
|
H. |
Transmission neutral safety start device. |
|
I. |
|
|
J. |
One 10-lb. hand held fire extinguisher mounted inside cab. |
|
PAINT: |
Manufacturer’s standard paint and color, factory painted. |
|
CONDITIONS: |
|
|
A. |
The services of a factory technician, thoroughly trained in the use and operation of the unit, shall be furnished for a period of not less than one (1) day and up to (2) days, if requested by the Eligible User, to instruct personnel in the use, operation and maintenance of the unit after delivery. This is to be done at the delivery location. |
|
B. |
At a minimum, the Manufacturer’s standard warranty for state and municipalities shall be provided. A copy of the warranty shall be provided with the bid. |
|
C. |
The Contractor shall provide any and all non-specified features or components necessary in order to provide a complete unit. |
|
COMMODITY NO. |
DESCRIPTION |
|
760-840-420 |
HYDRAULIC EXCAVATOR, HOE TYPE, CRAWLER MOUNTED, 44,000 LBS. OPERATING WEIGHT, MINIMUM |
|
Total Cost of Ownershipwith Guaranteed Maintenance and Repurchase |
|
|
LIFE CYCLE ANALYSIS |
|
|
Contractor |
RING POWER CORPORATION |
|
Model |
CATERPILLAR 320CL |
|
Price |
1. Price per general specifications with factory warranty:$137,096.00 each |
|
2. Guaranteed maintenance, from receiving date through five (5) years or 5000 hours of operation, whichever occurs first:$1,500.00 each |
|
|
3. Guaranteed repurchase price at the end of five (5) years or 5000 hours of operation, whichever occurs first:$80,000.00 each |
|
|
ATTENTION:TCO is a method of acquisition requiring the initial purchase of the equipment (Item #1), providing a maintenance ceiling price (#2), and a guaranteed repurchase price (#3).Please see the Contract, Section 1.16 Basis for Award, for specific details. |
|
|
Annual Leasing |
|
|
Contractor |
GS Equipment, Inc. |
|
Make: |
Kobelco |
|
Model |
SK 210 |
|
Item Description |
Hydraulic Excavator |
|
Annual (12 month) Lease, including all delivery & maintenance: $49,500.00 |
|
|
ATTENTION:State Agencies must obtain PRIOR lease approval from the Florida Department of Financial Services BEFORE the leasing of equipment! |
|
|
Monthly Leasing |
|
|
Contractor |
RING POWER |
|
Make: |
CATERPILLAR |
|
Model |
325CL |
|
Item Description |
EXCAVATOR |
|
Monthly Lease, including all delivery & maintenance:$6,000.00 |
|
|
ATTENTION:State Agencies must obtain PRIOR lease approval from the Florida Department of Financial Services BEFORE the leasing of equipment! |
|
|
Purchase |
|
|
Contractor |
Nortrax Equipment CompanySE LP |
|
Discount* |
($260) |
|
Model |
200 CLC |
|
http://www.deere.com/en_US/cfd/construction/deere_const/excavators/200clc_general.html |
|
|
Price |
$110,950.00 |
|
Percentage discount off the current Manufacturer’s Suggested Retail Price for non-specified options for the model bid. The percentage discount is applied to the Manufacturer’s Suggested Retail Price to determine the actual price of an option. |
|
|
DISCOUNT % |
40% |
|
CURRENT MSRP DATE |
3-May-05 |
|
*Discount for equipment picked up by ordering Eligible User at Contractor’s place of business. |
Nortrax - 90 Days |
|
Approximate delivery time required ARO: |
|
|
Note to users:Options are listed for the purchase of this equipment only!Purchasers needing options for lease equipment or Total Cost acquisitions are to negotiate option prices with Contractors. |
|
|
760-840-420 |
HYDRAULIC EXCAVATOR, HOE TYPE, CRAWLER MOUNTED, 44,000 LBS. OPERATING WEIGHT, MINIMUM |
|
OPTIONS: |
|
|
1001 |
High efficiency bypass oil purification system. This system is designed to reduce or eliminate engine oil changes and extend its useful life. The Puradyn Oil Filtration System or approved equivalent. Puradyn Filter Technologies, Inc. 1-800-488-0577. |
|
PRICE |
N/A |
|
1002 |
High efficiency bypass oil purification system. This system is designed to reduce or eliminate hydraulic oil changes and extend its useful life. The Puradyn Oil Filtration System or approved equivalent. Puradyn Filter Technologies, Inc. 1-800-488-0577. |
|
PRICE |
N/A |
|
1003 |
Automatic lubrication system. System shall consist of an electronically operated pump metering Class 2 lubricant to each lubrication point. Groeneveld, Vogel Automatic Lubrication System of approved equivalent. Groeneveld Atlantic South, Inc. (813) 626-5600, Vogel Lubrication, Inc. (757) 380-8585, email: vogel@vogel-lube.com. |
|
PRICE |
$7,750.00 |
|
1004 |
Delete air conditioner from fully enclosed cab. |
|
PRICE (CREDIT) |
N/A |
|
1005 |
Special state color, DOT Yellow, Federal Yellow No. 13538, DuPont #L9069A, ACME No. 2712, Deere No. PT102, or approved equivalent, (may be Contractor painted if factory painting is not available). NOTE: The entire unit, including options, shall be painted the same color. |
|
PRICE |
$3,200.00 |