760-480-100 - Wheel Loader, 2.50 Cu. Yd., 130 Net HP
|
(REV 9 JAN 06) |
|
|
NOTE: |
This detailed specification is not complete unless it is used in conjunction with all conditions of the Technical Specifications. |
|
INTENDED USE: |
USED FOR LOADING MATERIAL SUCH AS DIRT, SAND, GRAVEL AND AGGREGATES. AVAILABLE WITH AN OPTIONAL QUICK CHANGE BUCKET COUPLER SYSTEM AND THREE OPTIONAL ATTACHMENTS. |
|
ENGINE: |
|
|
A. |
Diesel engine, six cylinder, four cycle, liquid cooled, minimum 130 SAE Net HP, per the latest issue of SAE J1349. |
|
B. |
Displacement, minimum 5.8L. |
|
C. |
Permanent anti-freeze. |
|
D. |
Engine hourmeter. |
|
E. |
Standard exhaust. |
|
F. |
Dry type air cleaner with service (restriction) indicator. |
|
G. |
Reversible or blower (ejector) fan. |
|
TRANSMISSION: |
Power shift transmission with torque converter, with a minimum of four forward and three reverse speeds. |
|
DRIVE TRAIN: |
|
|
A. |
Torque proportioning differentials in both axles, limited slip, or automatic locking differential (No-Spin) in one axle only. |
|
B. |
Four-wheel drive. |
|
LOADER: |
|
|
A. |
General-purpose bucket, with a minimum heaped capacity of 2.50 cubic yards, per latest issue of SAE J742. |
|
CAPACITY |
Briggs - 2.5 Cubic YardsJCB - 2.6 Cubic Yards |
|
B. |
Bolt on bucket teeth. |
|
C. |
One or two lever loader control; with a bucket position indicator. |
|
D. |
Automatic return-to-dig. |
|
E. |
Rear drawbar. |
|
F. |
Fenders front and rear. (Note: Rear fenders not required if deck configuration is such that it serves same purpose as fenders). |
|
G. |
Vandal protection, with instrument panel protection and locks for engine side shields, battery box, toolbox and fluid caps. |
|
H. |
Gauges and indicators: Visual hydraulic oil level indicator, and gauges for fuel, engine coolant temperature, and engine oil pressure, charging system and transmission oil temperature. Or, preferably, an electronic monitor for all fluid levels and temperatures. |
|
I. |
Articulated steering, minimum 40 degrees each direction. |
|
TURN ANGLE |
Briggs - 40 Degrees each directionJCB - 40 Degrees |
|
K. |
Oscillating rear axle, minimum 22 degrees total. |
|
OSCILLATION |
Briggs - 24 DegreesJCB - 25 Degrees |
|
L. |
Wheelbase of 9 feet 5 inches, minimum. |
|
WHEELBASE |
Briggs - 9 feet 6.2 inchesJCB - 9 feet 8 inches |
|
PERFORMANCE: |
(Per latest issues of SAE J732, J818, and J1234): |
|
A. |
Minimum operating weight of 23,000 pounds. To be determined from Manufacturer’s literature with Manufacturer’s standard equipment, ROPS cab, minimum 2.50 cubic yard general purpose bucket, fenders, 17.5-25 12PR L2or larger tires and no optional counterweights or tire ballast. |
|
NOTE: These conditions are only for determining the performance of the machine. The actual requirements for tires, counterweights/liquid tire ballast, etc. are given elsewhere in this specification. |
|
|
OPERATING WEIGHT |
Briggs - 25,922 lbsJCB - 27,890 lbs |
|
B. |
The machine as delivered shall have an operating weight great enough to allow it to be capable of safely handling any 2.50 cubic yard bucket specified herein, when it is fully loaded (heaped) with material having a density of 3400 lbs. per cubic yard. |
|
DELIVERED WEIGHT |
Briggs - 25,922 lbsJCB - 27,575 lbs |
|
C. |
Minimum tipping load, SAE rating (full turn position) of 16,000 pounds. |
|
TIPPING LOAD |
Briggs - 17,985 lbsJCB - 16,660 lbs |
|
D. |
Minimum breakout force of 23,000 pounds. |
|
BREAKOUT FORCE |
Briggs - 23,410 lbsJCB - 30,375 lbs |
|
E. |
Minimum dump clearance of 8 feet 6 inches fully raised at a 45 degree dump angle with 17.5-25 12PR L2 or larger tires. |
|
DUMP CLEARANCE |
Briggs - 9 feet 2.2 inchesJCB - 9 feet 2 inches @ 45 Degrees |
|
F. |
Maximum overall height (to highest point, with bucket on the ground) of 11 feet with 17.5-25 12PR L2 or larger tires. |
|
MAXIMUM HEIGHT |
Briggs - 10 feet 8.3 inchesJCB - 10 feet 11 inches |
|
G. |
Maximum loader clearance circle of 39 feet (bucket in carry position). |
|
CLEARANCE CIRCLE |
Briggs - 37 feet 10.7 inchesJCB - 38 feet |
|
H. |
Minimum travel speed forward, 20 MPH. |
|
TRAVEL SPEED |
Briggs - 23 MPHJCB - 23.9 MPH |
|
ELECTRICAL: |
|
|
A. |
Direct electric starting system, 12-volt minimum to include a transmission neutral safety start device. |
|
B. |
Minimum 12-volt electrical system, per the latest issue of SAE J821 with a manual master battery disconnect switch. |
|
C. |
Minimum 12-volt lighting system, including but not limited to driving lights, front and rear working lights (2 each), stop lights, warning lights/turn signals, and tail lights, per the latest issue of SAE J1029. |
|
ROPS/FOPS CAB: |
Fully enclosed cab, sound insulated with integral ROPS (roll over protective structure) and FOPS (falling object protective structure), per latest issues of SAE J1040C and SAE J231, fully certified. To include air conditioning, heater, defroster, tinted safety glass, suspension seat and lockable doors. |
|
SAFTEY ITEMS: |
|
|
A. |
Service, emergency and parking brake systems must be according to the latest issue of SAE J1152. To include transmission disconnect on L.H. brake pedal only. |
|
B. |
Safe access to machine cab and servicing points to be in accordance with the latest issue of SAE J185. Safety signs per latest issue of SAE J115. |
|
C. |
Steering frame lock, per latest issue of SAE J276. |
|
D. |
Lift arm support device, per latest issue of SAE J38. |
|
E. |
Self-adjusting volume backup alarm (may be provided and installed by the Contractor, if not available from the Manufacturer), per the latest issue of SAE J994. |
|
F. |
Warning horn, per the latest issue of SAE J1105. |
|
G. |
Provisions to prevent unauthorized starting or movement of machines, per latest issue of SAE J1083. |
|
H. |
Three (3) rear-view mirrors mounted on cab, one inside cab and two outside one on each side. |
|
I. |
One 10-lb. hand held fire extinguisher mounted inside cab. |
|
J. |
Windshield wipers front and rear. Front and rear window washers. |
|
K. |
Seat belt with metal-to-metal fasteners, per the latest issue of SAE J386. |
|
L. |
SMV (Slow Moving Equipment) emblem mounted on rear of the machine, per the latest issue of SAE J943. |
|
TIRES: |
Four (4) 17.5R25 or larger radial tubeless loader tread tires. Michelin 17.5R25 XTLA One Star L2, Goodyear 17.5R25 GP-2B One Star L2 or approved equivalent. |
|
TIRE MFR |
Briggs - GoodyearJCB - GOODYEAR PREFERRED (TIRE OPTION SUPPLY BASED ON AVAILABILITY) |
|
SIZE & DESIGNATION |
Briggs - 20.5R25 GP2BJCB - GP-2B 20.5 5 R25, L2 |
|
PAINT: |
Manufacturer’s standard paint and color, factory painted. |
|
CONDITIONS: |
|
|
A. |
At a minimum, the Manufacturer’s standard warranty for state and municipalities shall be provided. A copy of the warranty shall be provided with the bid. |
|
B. |
The Contractor shall provide any and all non-specified features or components necessary in order to provide a complete unit. |
|
COMMODITY NO. |
DESCRIPTION |
|
760-480-100 |
WHEEL LOADER, 2.50 CU. YD., 130 NET HP |
|
Total Cost of Ownershipwith Guaranteed Maintenance and Repurchase |
|
|
LIFE CYCLE ANALYSIS |
|
|
Contractor |
RING POWER CORPORATION |
|
Model |
CATERPILLAR 928GZ |
|
Price |
1. Price per general specifications with factory warranty:$96,696.00 each |
|
2. Guaranteed maintenance, from receiving date through five (5) years or 5000 hours of operation, whichever occurs first:$1,500.00 each |
|
|
3. Guaranteed repurchase price at the end of five (5) years or 5000 hours of operation, whichever occurs first:$55,000.00 each |
|
|
ATTENTION:TCO is a method of acquisition requiring the initial purchase of the equipment (Item #1), providing a maintenance ceiling price (#2), and a guaranteed repurchase price (#3).Please see the Contract, Section 1.16 Basis for Award, for specific details. |
|
|
Leasing |
|
|
Contractor |
JCB INC. |
|
Make: |
JCB |
|
Model |
426ZX |
|
Item Description |
WHEEL LOADER |
|
Annual (12 month) Lease, including all delivery & maintenance: $31,281.00 |
|
|
Monthly Lease, including all delivery & maintenance:$3,200.00 |
|
|
ATTENTION:State Agencies must obtain PRIOR lease approval from the Florida Department of Financial Services BEFORE the leasing of equipment! |
|
|
Purchase |
|
|
Contractor |
Briggs Equipment |
|
Discount* |
$200 |
|
Model |
621D |
|
http://www.casece.com/products/products_detail.asp?RL=NAE&ID=1920 |
|
|
PRICE |
$85,676.00 |
|
*Discount for equipment picked up by ordering Eligible User at Contractor’s place of business. |
|
|
Percentage discount off the current Manufacturer’s Suggested Retail Price for non-specified options for the model bid. The percentage discount is applied to the Manufacturer’s Suggested Retail Price to determine the actual price of an option. |
|
|
DISCOUNT % |
30% |
|
CURRENT MSRP DATE |
1-Apr-05 |
|
Approximate delivery time required ARO: |
90 Days |
|
Note to users:Options are listed for the purchase of this equipment only!Purchasers needing options for lease equipment or Total Cost acquisitions are to negotiate option prices with Contractors. |
|
|
760-480-100 |
WHEEL LOADER, 2.50 CU. YD., 130 NET HP |
|
OPTIONS: |
|
|
1001 |
High efficiency bypass oil purification system. This system is designed to reduce or eliminate engine oil changes and extend its useful life. The Puradyn Oil Filtration System or approved equivalent. Puradyn Filter Technologies, Inc. 1-800-488-0577. |
|
PRICE |
$975.00 |
|
1002 |
High efficiency bypass oil purification system. This system is designed to reduce or eliminate hydraulic oil changes and extend its useful life. The Puradyn Oil Filtration System or approved equivalent. Puradyn Filter Technologies, Inc. 1-800-488-0577. |
|
PRICE |
$975.00 |
|
1003 |
Automatic lubrication system. System shall consist of an electronically operated pump metering Class 2 lubricant to each lubrication point. Groeneveld, Vogel Automatic Lubrication System of approved equivalent. Groeneveld Atlantic South, Inc. (813) 626-5600, Vogel Lubrication, Inc. (757) 380-8585, email: vogel@vogel-lube.com. |
|
PRICE |
$5,980.00 |
|
1004 |
Delete standard bucket for credit. |
|
PRICE (CREDIT) |
($4,000.00) |
|
1005 |
Quick-change loader coupler system installed. Male portion only. See below for Options. To include hydraulic pin actuation from operation station. American Coupler Systems, Inc. Series 1000, Size 30 (Phone 800-321-2348). Note: Do not substitute any other coupler system for this Option.NOTE: SPECIFIC COMPONENTS ARE REQUIRED DUE TO INTERCHANGEABILITY OR STANDARDIZATION. |
|
(NOTE TO USER: MUST ORDER THIS OPTION FOR AMERICAN COUPLER SYSTEM; REQUIRES OPTION 1004). |
|
|
PRICE |
$3,945.00 |
|
1006 |
Extendable boom for Option 1005. State model no. and size Bid. |
|
MODEL NO. & SIZE |
1000/30 size 30 |
|
PRICE |
$3,445.00 |
|
1007 |
Wide forks for Option 1005. Bid standard length and extra length tines, if available. State model no.’s and sizes Bid. |
|
STANDARD LENGTH FORKS |
|
|
MODEL NO. & SIZE |
1000/30size 48 inch |
|
PRICE |
$4,980.00 |
|
EXTRA LENGTH FORKS |
|
|
MODEL NO. & SIZE |
1000/30 size 60 inch |
|
PRICE |
$5,275.00 |
|
1008 |
General-purpose bucket, 2.50 cubic yard minimum, for Option 1005. NOTE: Must meet the same performance requirements as specified in 41.B. State model no. and size Bid. |
|
MODEL NO. & SIZE |
1000/30 2.5 yd |
|
PRICE |
$5,997.00 |
|
1009 |
Delete air conditioner from fully enclosed cab. |
|
PRICE(CREDIT) |
($2,100.00) |
|
1010 |
Special state color, DOT Yellow, Federal Yellow No. 13538, DuPont #L9069A, ACME No. 2712, Deere No. PT102, or approved equivalent, (may be Contractor painted if factory painting is not available). NOTE: The entire unit, including options, shall be painted the same color. |
|
PRICE |
$3,029.00 |