760-420-100 - Compact Track Loader, Diesel Powered
|
NOTE: |
This detailed specification is not complete unless it is used in conjunction with all conditions of the Technical Specifications. |
|
INTENDED USE: |
USED FOR A VARIETY OF APPLICATIONS SUCH AS ROAD MAINTENANCE, LANDSCAPING, FARMING, BUILDING CONSTRUCTION, ETC. ITS MANEUVERABILITY AND COMPACT SIZE IS IDEAL FOR WORKING IN TIGHT AREAS. |
|
ENGINE: |
|
|
A. |
Diesel engine, four cylinder, four cycle, liquid cooled, minimum 78 HP, per the latest issue of SAE J1349. |
|
B. |
Displacement, minimum 3.0L. |
|
C. |
Engine hourmeter. |
|
D. |
Permanent anti-freeze. |
|
E. |
Dry type air cleaner with service (restriction) indicator. |
|
DRIVE TRAIN: |
|
|
A. |
Hydrostatic transmission with variable forward and reverse speeds. |
|
B. |
Forward, reverse, and steering controlled by one or two hand lever(s). Self centering steering controls. |
|
C. |
Four-wheel drive. |
|
LOADER: |
|
|
A. |
Industrial/construction bucket, minimum capacity (heaped) 17.00 cubic feet. |
|
CAPACITY |
JCB - 78 inches - 18.1 Cubic FeetBriggs - 19.00 Cubic Feet |
|
B. |
Lift arm and bucket shall be controlled either by hand lever(s) or foot-pedals. |
|
C. |
Self-leveling bucket mechanism. |
|
CHASSIS: |
|
|
A. |
Rubber track drive undercarriage. |
|
B. |
Tracks shall be 17.5 inches wide, minimum. |
|
C. |
Vandal protection, with locks for engine side shields, battery box, toolbox and fluid caps. |
|
D. |
Gauges and indicators: Visual hydraulic oil level indicator, and gauges for engine coolant temperature, and engine oil pressure. Or preferably, an electronic monitor for all fluid levels and temperatures. |
|
ELECTRICAL: |
|
|
A. |
Minimum 12-volt electrical system. |
|
B. |
Minimum 12-volt lighting system, including but not limited to front and rear working light(s), and warning (flashing) lights. |
|
PERFORMANCE: |
|
|
A. |
Operating weight shall be 9100 lbs., minimum. |
|
OPERATING WEIGHT |
JCB - 10,198 lbsBriggs - 10,915 lbs |
|
B. |
Tipping capacity, SAE rating shall be 6400 lbs., minimum. |
|
TIPPING LOAD |
JCB - 6,439 lbsBriggs - 7,714 lbs |
|
C. |
Rated operating capacity @ 35% tipping load shall be 2250 lbs., minimum. |
|
LOAD RATING |
JCB - 2,250 lbsBriggs - 2,700 lbs |
|
D. |
Fully raised height (ground level to bucket hinge pin) of 122 inches, minimum. |
|
RAISED HEIGHT |
JCB - 10 feet 3 inches (125 inches)Briggs - 124.5 inches |
|
E. |
Ground pressure of 4.8 psi, maximum. |
|
GROUND PRESSURE |
JCB - 4.8 psiBriggs - 4.8 psi |
|
ROPS/FOPS CAB: |
Fully enclosed ROPS (rollover protective structure) and FOPS (falling object protective structure) cab, per latest issues of J1040 and J231, fully certified. To include air conditioner, heater defroster, tinted safety glass, suspension seat and lockable doors. |
|
SAFTEY ITEMS: |
|
|
A. |
Service, emergency and parking brake systems. |
|
B. |
Safe access to machine cab and servicing points to be in accordance with the latest issue of SAE J185. Safety signs per latest issue of SAE J115. |
|
C. |
Lift arm support device, per latest issue of SAE J38. |
|
D. |
Self-adjusting volume backup alarm (may be provided and installed by the Contractor, if not available from the Manufacturer), per the latest issue of SAE J994. |
|
E. |
Warning horn (may be provided and installed by the Contractor, if not available from the Manufacturer), per the latest issue of SAE J1105. |
|
F. |
Provisions to prevent unauthorized starting or movement of machines, per latest issue of SAE J1083. |
|
G. |
One 5-lb. hand held fire extinguisher mounted inside the operator's compartment. |
|
H. |
Seat belt with metal-to-metal fasteners, per the latest issue of SAE J386. |
|
I. |
SMV (Slow Moving Equipment) emblem mounted on rear of the machine, per the latest issue of SAE J943 |
|
PAINT: |
Manufacturer’s standard paint and color, factory painted. |
|
CONDITIONS: |
|
|
A. |
At a minimum, the Manufacturer’s standard warranty for state and municipalities shall be provided. A copy of the warranty shall be provided with the bid. |
|
B. |
The Contractor shall provide any and all non-specified features or components necessary in order to provide a complete unit. |
|
COMMODITY NO. |
DESCRIPTION |
|
760-420-100 |
COMPACT TRACK LOADER, DIESEL POWERED |
|
Total Cost of Ownershipwith Guaranteed Maintenance and Repurchase |
|
|
LIFE CYCLE ANALYSIS |
|
|
Contractor |
RING POWER CORPORATION |
|
Model |
CATERPILLAR 287B |
|
Price |
1. Price per general specifications with factory warranty:$55,073.00 each |
|
2. Guaranteed maintenance, from receiving date through five (5) years or 5000 hours of operation, whichever occurs first:$1,500.00 each |
|
|
3. Guaranteed repurchase price at the end of five (5) years or 5000 hours of operation, whichever occurs first:$25,000.00 each |
|
|
ATTENTION:TCO is a method of acquisition requiring the initial purchase of the equipment (Item #1), providing a maintenance ceiling price (#2), and a guaranteed repurchase price (#3).Please see the Contract, Section 1.16 Basis for Award, for specific details. |
|
|
Annual Leasing |
|
|
Contractor |
JCB INC. |
|
Make: |
JCB |
|
Model |
1110T |
|
Item Description |
ROBOT TRACKED LOADER |
|
Annual (12 month) Lease, including all delivery & maintenance: $18,836.00 |
|
|
ATTENTION:State Agencies must obtain PRIOR lease approval from the Florida Department of Financial Services BEFORE the leasing of equipment! |
|
|
Monthly Leasing |
|
|
Contractor |
Briggs Equipment |
|
Make: |
Case |
|
Model |
Case 450 CT Compact Track Loader |
|
http://www.casece.com/products/products_detail.asp?RL=NAE&ID=3293 |
|
|
Item Description |
|
|
Monthly Lease, including all delivery & maintenance:$1.900.00 |
|
|
ATTENTION:State Agencies must obtain PRIOR lease approval from the Florida Department of Financial Services BEFORE the leasing of equipment! |
|
|
Purchase |
|
|
Contractor |
JCB INC. |
|
Discount* |
$300 |
|
Model |
1110T |
|
Price |
$ 41,249.00 (LIST PRICE LESS DISCOUNT) |
|
*Discount for equipment picked up by ordering Eligible User at Contractor’s place of business. |
|
|
Percentage discount off the current Manufacturer’s Suggested Retail Price for non-specified options for the model bid. The percentage discount is applied to the Manufacturer’s Suggested Retail Price to determine the actual price of an option. |
|
|
DISCOUNT % |
ATTACHMENTS PURCHASED WITH MACHINE - 24.90% |
|
ATTACHMENTS PURCHASED LOOSE - 10% |
|
|
SPARE PARTS - CURRENT PUBLISHED LIST PRICE |
|
|
CURRENT MSRP DATE |
JANUARY 1, 2005 |
|
Approximate delivery time required ARO: |
60 days |
|
Note to users:Options are listed for the purchase of this equipment only!Purchasers needing options for lease equipment or Total Cost acquisitions are to negotiate option prices with Contractors. |
|
|
760-420-100 |
COMPACT TRACK LOADER, DIESEL POWERED |
|
OPTIONS: |
|
|
1001 |
High efficiency bypass oil purification system. This system is designed to reduce or eliminate engine oil changes and extend its useful life. The Puradyn Oil Filtration System or approved equivalent. Puradyn Filter Technologies, Inc. 1-800-488-0577. |
|
PRICE |
$390.00 |
|
1002 |
High efficiency bypass oil purification system. This system is designed to reduce or eliminate hydraulic oil changes and extend its useful life. The Puradyn Oil Filtration System or approved equivalent. Puradyn Filter Technologies, Inc. 1-800-488-0577. |
|
PRICE |
$442.00 |
|
1003 |
Automatic lubrication system. System shall consist of an electronically operated pump metering Class 2 lubricant to each lubrication point. Groeneveld, Vogel Automatic Lubrication System of approved equivalent. Groeneveld Atlantic South, Inc. (813) 626-5600, Vogel Lubrication, Inc. (757) 380-8585, email: vogel@vogel-lube.com. |
|
PRICE |
NOT OFFERED |
|
1004 |
Delete fully enclosed cab. |
|
PRICE (CREDIT) |
($2,692.00) |
|
1005 |
Special state color, DOT Yellow, Federal Yellow No. 13538, DuPont #L9069A, ACME No. 2712, Deere No. PT102, or approved equivalent, (may be Contractor painted if factory painting is not available). NOTE: The entire unit, including options, shall be painted the same color. |
|
PRICE |
$2,660.00 |
|
1006 |
Transport trailer, designed specifically to transport the model Bid. Axles, suspension, tires and electric brake system must be sized as required for this size trailer. 2 5/16 ball hitch, safety chains, full fenders, and loading ramps. |
|
PRICE |
N/A |