760-360-075 - Motor Grader, 10 Foot Blade, Articulated, 110 Net HP

NOTE:

This detailed specification is not complete unless it is used in conjunction with all conditions of the Technical Specifications.

INTENDED USE:

USED PRIMARILY FROM SHOULDER REPAIR ALONG HIGHWAY SYSTEMS, MAINTAINING IMPROVED GRADED ROADS AND SITE PREPARATION, ETC.

ENGINE:

A.

Diesel engine, four cylinder, four cycle, liquid cooled, minimum 110 SAE Net HP, per the latest issue of SAE J1349.

B.

Displacement, minimum 3.9L.

C.

Permanent anti-freeze.

D.

Engine hourmeter.

E.

Standard exhaust.

F.

Dry type air cleaner with service (restriction) indicator.

TRANSMISSION:

Dual range hydrostatic or powershift with torque converter.

DRIVE TRAIN:

A.

Positive traction/limited-slip, automatic locking or torque proportioning differential.

B.

Four driving wheels, two steering wheels, six wheels total.

CHASSIS:

A.

Full hydraulic controls on blade, including raising and lowering, circle sideshift (centershift), and blade pitch (also called “tip” or “tilt”).

B.

Interlocks in the control valves or lock valves to eliminate blade drift or creep.

C.

Ten (10) foot blade, with replaceable cutting edge(s) and end bits.

D.

Hydraulic wheel lean, with oscillating front axle.

E.

Hydraulic frame articulation, minimum of 16 degrees, either way.

F.

All steel, fully enclosed, sound controlled, ROPS cab, factory installed. To include air conditioning, heater and defroster, tinted safety glass and lockable doors.

G.

Rear draw bar.

H.

Vandalism protection group. Include locks for engine side panels, toolbox, battery covers, and all exposed hydraulic, fuel, coolant and oil fluid caps. All locks to be keyed alike and at least two keys shall be furnished. Note: Covers are not required for any items listed above which are inside the lockable cab.

I.

Drain valve under fuel tank.

J.

Power-actuated or power-boosted hydraulic steering, for front wheels and frame articulation.

PERFORMANCE:

(per the latest issues of SAE J695 and J1234)

A.

Maximum overall machine height (to highest point) of 10 feet 0 inches.

MAXIMUM HEIGHT

9 feet

B.

Circle rotation, 120 degrees, minimum.

C.

Minimum shoulder reach with frame straight to be a minimum of 24 inches right and 24 inches left, beyond the tires.

REACH (R)

36 inches

REACH (L)

36 inches

D.

Must be able to be prepared for towing and/or loading with dead engine within 30 minutes.

E.

Minimum total machine operating weight, when equipped with all manufacturer’s standard equipment, and a ROP/FOPS canopy, shall be 15,000 pounds.

OPERATING WEIGHT

15,220 LBS

F.

Minimum top speed forward of 15 MPH.

TOP SPEED

20 MPH

ELECTRICAL:

A.

Direct electric starting system, 12-volt minimum, with a transmission neutral safety start device.

B.

Minimum 12-volt electrical system, with a manual master battery disconnect switch.

C.

Lighting system, including, but not limited to, two (2) headlights on cab, one (1) or two (2) flood lights on rear of cab, stop and tail lights, warning (flashing) lights/turn signals, and instrument panel light(s).

D.

Gauges for fuel, engine coolant temperature, and engine oil pressure and charge indicator. (Machines with torque converter must also have transmission oil temperature gauge.) Or, an electronic monitoring system for the same functions.

ROPS/FOPS CAB:

Fully enclosed ROPS (rollover protective structure) and FOPS (falling object protective structure) cab, per latest issues of J1040 and J231, fully certified. To include air conditioner, heater defroster, tinted safety glass, suspension seat and lockable doors.

SAFTEY ITEMS:

A.

Service, emergency and parking brakes must be according to the latest issue of SAE J1152.

B.

Safe access to machine cab and servicing points to be in accordance with the latest issue of SAE J185. Safety signs per latest issue of SAE J115.

C.

Self-adjusting volume backup alarm (may be provided and installed by the Contractor, if not available from the Manufacturer), per the latest issue of SAE J994.

D.

Warning horn (may be provided and installed by the Contractor, if not available from the Manufacturer), per the latest issue of SAE J1105.

E.

Windshield wipers front and rear. Front and rear window washers.

F.

Three (3) rear view mirrors, one inside cab, one outside on each side.

G.

One 10-lb. hand held fire extinguisher mounted inside cab.

H.

Provisions to prevent unauthorized starting or movement of machines, per latest issue of SAE J1083.

I.

Steering frame lock (refer to SAE J276).

J.

Seat belt with metal-to-metal fasteners, per the latest issue of SAE J386.

K.

SMV (Slow Moving Equipment) emblem mounted on rear of the machine, per the latest issue of SAE J943.

TIRES & WHEELS:

Six (6) radial tubeless grader tread tires, 15-19.5 NHS/G2, 8PR minimum or larger.

TIRE MFR

SIZE & DESIGNATION

15 X 19.5 NHS

PAINT:

Manufacturer’s standard paint and color, factory painted.

CONDITIONS:

A.

At a minimum, the Manufacturer’s standard warranty for state and municipalities shall be provided. A copy of the warranty shall be provided with the bid.

B.

The Contractor shall provide any and all non-specified features or components necessary in order to provide a complete unit.

COMMODITY NO.

DESCRIPTION

760-360-075

MOTOR GRADER, 10 FOOT BLADE, ARTICULATED, 110 NET HP

Total Cost of Ownershipwith Guaranteed Maintenance and Repurchase

LIFE CYCLE ANALYSIS

Contractor

RING POWER CORPORATION

Model

LEEBOY 685

http://www.leeboy.com/uploadedFiles/685motorgrader.pdf

Price

1. Price per general specifications with factory warranty:$105,278.00 each

2. Guaranteed maintenance, from receiving date through five (5) years or 5000 hours of operation, whichever occurs first:$4,248.00 each

3. Guaranteed repurchase price at the end of five (5) years or 5000 hours of operation, whichever occurs first:$41,000.00 each

ATTENTION:TCO is a method of acquisition requiring the initial purchase of the equipment (Item #1), providing a maintenance ceiling price (#2), and a guaranteed repurchase price (#3).Please see the Contract, Section 1.16 Basis for Award, for specific details.

Leasing

Contractor

RING POWER CORPORATION

Make:

LEEBOY

Model

685

http://www.leeboy.com/uploadedFiles/685motorgrader.pdf

Item Description

MOTOR GRADER

Annual (12 month) Lease, including all delivery & maintenance: $38,070.00

Monthly Lease, including all delivery & maintenance:$3,170.00

ATTENTION:State Agencies must obtain PRIOR lease approval from the Florida Department of Financial Services BEFORE the leasing of equipment!

Purchase

Contractor

RING POWER CORPORATION

Discount*

0.002%

Model

LEEBOY 685

http://www.leeboy.com/uploadedFiles/685motorgrader.pdf

Price

$99,426.00

*Discount for equipment picked up by ordering Eligible User at Contractor’s place of business.

Percentage discount off the current Manufacturer’s Suggested Retail Price for non-specified options for the model bid. The percentage discount is applied to the Manufacturer’s Suggested Retail Price to determine the actual price of an option.

DISCOUNT %

10%

CURRENT MSRP DATE

4/15/2005

Approximate delivery time required ARO:

90

Note to users:Options are listed for the purchase of this equipment only!Purchasers needing options for lease equipment or Total Cost acquisitions are to negotiate option prices with Contractors.

760-360-075

MOTOR GRADER, 10 FOOT BLADE, ARTICULATED, 110 NET HP

OPTIONS:

1001

High efficiency bypass oil purification system. This system is designed to reduce or eliminate engine oil changes and extend its useful life. The Puradyn Oil Filtration System or approved equivalent. Puradyn Filter Technologies, Inc. 1-800-488-0577.

PRICE

N/A

1002

All wheel drive model. Unit shall be of the same Manufacturer. Model bid shall meet or exceed all other minimum requirements and features as specified for the base model bid. Note to bidder: Provide only the difference in price between the two wheel drive base model and the all wheel drive model offered.

PRICE

$9,890.00

1003

High efficiency bypass oil purification system. This system is designed to reduce or eliminate hydraulic oil changes and extend its useful life. The Puradyn Oil Filtration System or approved equivalent. Puradyn Filter Technologies, Inc. 1-800-488-0577.

PRICE

N/A

1004

Automatic lubrication system. System shall consist of an electronically operated pump metering Class 2 lubricant to each lubrication point. Groeneveld, Vogel Automatic Lubrication System of approved equivalent. Groeneveld Atlantic South, Inc. (813) 626-5600, Vogel Lubrication, Inc. (757) 380-8585, email: vogel@vogel-lube.com.

PRICE

$3,800.00

1005

Delete air conditioner from fully enclosed cab.

PRICE (CREDIT)

($3,096.00)

1006

ROPS canopy in lieu of fully enclosed cab.

PRICE (CREDIT)

($6,020.00)

1007

Special state color, DOT Yellow, Federal Yellow No. 13538, DuPont #L9069A, ACME No. 2712, Deere No. PT102, or approved equivalent, (may be Contractor painted if factory painting is not available). NOTE: The entire unit, including Options, shall be painted the same color.

PRICE

$3,026.00