760-360-025 - Maintainer, All Wheel Drive, 10 Foot Blade, 110 Net HP
|
NOTE: |
This detailed specification is not complete unless it is used in conjunction with all conditions of the Technical Specifications. |
|
INTENDED USE: |
USED FOR MAINTAINING ROADSIDE SHOULDERS, DRIVEWAYS AND MEDIANS IN URBAN AREAS. |
|
ENGINE: |
|
|
A. |
Diesel engine, four cylinder, four cycle, liquid cooled, minimum 110 SAE Net HP, per the latest issue of SAE J1349. |
|
B. |
Displacement, minimum 3.9L. |
|
C. |
Permanent anti-freeze. |
|
D. |
Engine hourmeter. |
|
E. |
Standard exhaust. |
|
F. |
Dry type air cleaner with service (restriction) indicator. |
|
TRANSMISSION: |
Dual range hydrostatic. |
|
DRIVE TRAIN: |
|
|
A. |
Limited slip differentials. |
|
B. |
Four-wheel drive. |
|
CHASSIS: |
|
|
A. |
Full hydraulic controls on blade, including raising and lowering, blade sideshift, and blade pitch (also called “tip” or “tilt”). |
|
B. |
Quick-attach front end loader, with 0.75 cubic yard bucket, minimum. |
|
C. |
Quick-attach rear mounted scarifier, 84 inches wide with seven shanks, minimum. |
|
D. |
Interlocks in the control valves or lock valves to eliminate blade drift or creep. |
|
E. |
Ten (10) foot blade, with replaceable cutting edge(s) and end bits. |
|
F. |
Oscillating front axle, 30 degrees total oscillation. |
|
G. |
Power steering. |
|
PERFORMANCE: |
(per the latest issues of SAE J695 and J1234) |
|
A. |
Maximum overall machine height (to highest point) of 9 feet 0 inches. |
|
MAXIMUM HEIGHT |
8 feet 11 inches |
|
B. |
Blade angle, 35 degrees, left or right, minimum. |
|
C. |
Minimum shoulder reach with frame straight to be a minimum of 35 inches right and 35 inches left. |
|
REACH (R) |
36 inches |
|
REACH (L) |
36 inches |
|
D. |
Loader dump height 10 feet 0 inches, minimum. |
|
DUMP HEIGHT |
10 feet 0 inches |
|
E. |
Bucket width 84 inches, minimum. |
|
WIDTH |
85 inches |
|
F. |
Minimum total machine operating weight, when equipped with all Manufacturer’s standard equipment, and a ROP/FOPS cab, shall be 13,800 pounds. |
|
WEIGHT (LBS.) |
13,220 lbs |
|
G. |
Minimum top speed forward of 15 MPH. |
|
TOP SPEED |
17 MPH |
|
ELECTRICAL: |
|
|
A. |
Direct electric starting system, 12-volt minimum, with a transmission neutral safety start device. |
|
B. |
Minimum 12-volt electrical system, with a manual master battery disconnect switch. |
|
C. |
Standard gauges and or indicators. Or, an electronic monitoring system for the same functions. |
|
ROPS CAB: |
Fully enclosed ROPS (rollover protective structure) cab, fully certified. To include air conditioner, heater, defroster, tinted safety glass, suspension seat and lockable doors. |
|
SAFTEY ITEMS: |
|
|
A. |
Service, emergency and parking brakes must be according to the latest issue of SAE J1026 |
|
B. |
Safe access to machine cab and servicing points to be in accordance with the latest issue of SAE J185. Safety signs per latest issue of SAE J115. |
|
C. |
Self-adjusting volume backup alarm (may be provided and installed by the Contractor, if not available from the Manufacturer), per the latest issue of SAE J994. |
|
D. |
Warning horn (may be provided and installed by the Contractor, if not available from the Manufacturer), per the latest issue of SAE J1105. |
|
E. |
Windshield wipers front and rear. |
|
F. |
Outside rear view mirrors. |
|
G. |
One 10-lb. hand held fire extinguisher mounted inside cab. |
|
H. |
Provisions to prevent unauthorized starting or movement of machines, per latest issue of SAE J1083. |
|
I. |
Seat belt with metal-to-metal fasteners, per the latest issue of SAE J386. |
|
J. |
SMV (Slow Moving Equipment) emblem mounted on rear of the machine, per the latest issue of SAE J943. |
|
TIRES & WHEELS: |
Four (4) 15-19.5 NHS, 8PR minimum, or larger. |
|
TIRE MFR |
TITAN / FIRESTONE |
|
SIZE & DESIGNATION |
15-19.5 NHS 8PR |
|
PAINT: |
Manufacturer’s standard paint and color, factory painted. |
|
CONDITIONS: |
|
|
A. |
At a minimum, the Manufacturer’s standard warranty for state and municipalities shall be provided. A copy of the warranty shall be provided with the bid. |
|
B. |
The Contractor shall provide any and all non-specified features or components necessary in order to provide a complete unit. |
|
COMMODITY NO. |
DESCRIPTION |
|
760-360-025 |
MAINTAINER, ALL WHEEL DRIVE, 10 FOOT BLADE, 110 NET HP |
|
Total Cost of Ownershipwith Guaranteed Maintenance and Repurchase |
|
|
LIFE CYCLE ANALYSIS |
|
|
Contractor |
No Award |
|
Leasing |
|
|
Contractor |
Highland Tractor CompanyP O Box 1810Ocala, FL34478 |
|
Make: |
Pavement Services, Inc. (PSI) |
|
Model |
M413XT |
|
Item Description |
MAINTAINER, ALL WHEEL DRIVE, 10 FOOT BLADE, 110 NET HP |
|
Annual (12 month) Lease, including all delivery & maintenance: $34,600.00 |
|
|
Monthly Lease, including all delivery & maintenance:$2,800.00 |
|
|
ATTENTION:State Agencies must obtain PRIOR lease approval from the Florida Department of Financial Services BEFORE the leasing of equipment! |
|
|
Purchase |
|
|
Contractor |
Highland Tractor Company P O Box 1810Ocala, FL34478 |
|
Discount* |
($200) |
|
Model |
M413XT |
|
Price |
$86,407.00 |
|
Percentage discount off the current Manufacturer’s Suggested Retail Price for non-specified options for the model bid. The percentage discount is applied to the Manufacturer’s Suggested Retail Price to determine the actual price of an option. |
|
|
DISCOUNT % |
5% |
|
CURRENT MSRP DATE |
13-Jun-05 |
|
*Discount for equipment picked up by ordering Eligible User at Contractor’s place of business. |
|
|
Approximate delivery time required ARO: |
120 Days |
|
Note to users:Options are listed for the purchase of this equipment only!Purchasers needing options for lease equipment or Total Cost acquisitions are to negotiate option prices with Contractors. |
|
|
760-360-025 |
MAINTAINER, ALL WHEEL DRIVE, 10 FOOT BLADE, 110 NET HP |
|
OPTIONS: |
|
|
1001 |
High efficiency bypass oil purification system. This system is designed to reduce or eliminate engine oil changes and extend its useful life. The Puradyn Oil Filtration System or approved equivalent. Puradyn Filter Technologies, Inc. 1-800-488-0577. |
|
PRICE |
NA |
|
1002 |
High efficiency bypass oil purification system. This system is designed to reduce or eliminate hydraulic oil changes and extend its useful life. The Puradyn Oil Filtration System or approved equivalent. Puradyn Filter Technologies, Inc. 1-800-488-0577. |
|
PRICE |
NA |
|
1003 |
Automatic lubrication system. System shall consist of an electronically operated pump metering Class 2 lubricant to each lubrication point. Groeneveld, Vogel Automatic Lubrication System of approved equivalent. Groeneveld Atlantic South, Inc. (813) 626-5600, Vogel Lubrication, Inc. (757) 380-8585, email: vogel@vogel-lube.com. |
|
PRICE |
NA |
|
1004 |
Delete air conditioner from fully enclosed cab. |
|
PRICE (CREDIT) |
($2,000.00) |
|
1005 |
ROPS canopy in lieu of the fully enclosed cab. |
|
PRICE (CREDIT) |
($2,000.00) |
|
1006 |
Special state color, DOT Yellow, Federal Yellow No. 13538, DuPont #L9069A, ACME No. 2712, Deere No. PT102, or approved equivalent, (may be Contractor painted if factory painting is not available). NOTE: The entire unit, including Options, shall be painted the same color. |
|
PRICE |
$950.00 |