Skip to Main Content. Please Contact Us if there is anything we can do to improve the Accessibility of this page.
560-650-610 - Forklift Truck, Rough Terrain, 8,000 lb. Capacity
| NOTE: | This detailed specification is not complete unless it is used in conjunction with all conditions of the Technical Specifications. |
| INTENDED USE: | USED IN ROUGH TERRAIN AREAS SUCH AS CONSTRUCTION, INDUSTRIAL AND AGRICULTURE APPLICATIONS. BASE UNIT HAS A 143 INCH MINIMUM FORK HEIGHT CAPABLE OF LIFTING 8,000 LBS. |
| ENGINE: | |
| A. | Diesel engine, four cycle, liquid cooled, with a minimum displacement of 3.2L per the latest issue of SAE J1349. |
| B. | Permanent anti-freeze. |
| C. | Dry type air cleaner with service (restriction) indicator. |
| D. | 12-volt electrical system, with an electric starter and a transmission neutral safety start device. |
| TRANSMISSION: | Heavy-duty industrial type transmission with torque converter; power-reversing with a minimum of four speeds forward and reverse. |
| DRIVE TRAIN: | Transmission and differential must be coupled with a drive shaft with U-joints, (preferred, for serviceability), or integral. No chain drive. |
| PERFORMANCE: | |
| A. | Overall height of machine (with mast vertical and lowered to ground) 10 feet 6 inches, maximum. |
| MAXIMUM HEIGHT | Yale Industrial - 108 inchesJCB - 9 feet 1 inch (109 inches) |
| LIFT MECHANISM: | |
| A. | Mast to operate on rollers or polyethylene blocks. |
| B. | Manufacturer's standard or simplex type mast assembly, minimum 143 inch fork height. Maximum visibility masts are preferred but not required. |
| FORK HEIGHT | Yale Industrial - 144 inchesJCB - 144 inches |
| FREE FORK HEIGHT | Yale Industrial - 0 inchesJCB - N/A |
| C. | Upright to have 9 degree minimum backward and 15 degree minimum forward tilt capability. |
| DEGREES FORWARD | Yale Industrial - 10B, 40FJCB - 20 Degrees |
| D. | A 48-inch (approx.) removable load backrest extension will be provided. |
| E. | Rated capacity of 8,000 lbs. at 24 inch load center, to full 143 inch fork height. |
| F. | Controlled lowering speeds, both in normal operation and when hydraulic pressure is lost for any reason. |
| G. | Minimum 42 inch forks that are laterally adjustable shall be provided. |
| FORK LENGTH | Yale Industrial - 42 inchesJCB - 48 inches |
| H. | Hydraulic system: direct-, gear-, or chain-driven pump (no belt drives), and paper filter(s), 10 micron or finer. |
| FEATURES: | |
| A. | Power assist or hydrostatic power steering. |
| B. | Engine hourmeter, oil pressure, charging system, temperature and fuel gauges, indicators, or warning lights. Or, an electronic monitoring system for the same functions. |
| C. | Full fenders. |
| COMFORT ITEMS: | Padded seat with backrest. |
| SAFTEY ITEMS: | |
| A. | Service brakes to be hydraulic. |
| B. | Parking brake to be manufacturer's standard configuration. |
| C. | Operator's overhead guard. |
| D. | Self-adjusting volume back up alarm, per the latest issue of SAE J994. |
| TIRES & WHEELS: | |
| A. | Single front drive tires, Manufacturer's standard R4 tread. |
| TIRE MFR | Yale Industrial - Goodyear or GalaxyJCB - 'FIRESTONE' CURRENTLY (TIRE PRODUCT VARIES BY SUPPLY AVAILABILITY) |
| SIZE & DESIGNATION | Yale Industrial - 19LX24R4JCB - 15.5 - 25 L2 (12 PLY) SURE GRIP LUGRing Power - |
| B. | Manufacturer's high-flotation rear steer tires with non-directional highway tread. |
| TIRE MFR | Yale Industrial - Goodyear or GalaxyJCB - 'TITAN' CURRENTLY (TIRE PRODUCT VARIES BY SUPPLY AVAILABILITY) |
| SIZE & DESIGNATION | Yale Industrial - 11LX16LaborerJCB - 12.5 / 80 - 18 (10 PLY) |
| PAINT: | Manufacturer's standard paint and color, factory painted. |
| CONDITIONS: | |
| A. | At a minimum, the Manufacturer's standard warranty for state and municipalities shall be provided. A copy of the warranty shall be provided with the bid. |
| B. | The Contractor shall provide any and all non-specified features or components necessary in order to provide a complete unit. |
| C. | Any trucks bid shall meet American National Standards Institute (ANSI) B56.1, part III Safety Standards for powered industrial lift trucks. |
| COMMODITY NO. | DESCRIPTION |
| 560-650-610 | FORKLIFT TRUCK, ROUGH TERRAIN, 8,000 LBS. CAPACITY |
| Total Cost of Ownershipwith Guaranteed Maintenance and Repurchase | |
| LIFE CYCLE ANALYSIS | |
| Contractor | Yale Industrial Trucks |
| Model | AE8112 |
| http://www.mclifts.com/ | |
| Price | 1. Price per general specifications with factory warranty:$38,295.00 each |
| 2. Guaranteed maintenance, from receiving date through five (5) years or 5000 hours of operation, whichever occurs first:$9,000.00 each | |
| 3. Guaranteed repurchase price at the end of five (5) years or 5000 hours of operation, whichever occurs first:$17,000.00 each | |
| ATTENTION:TCO is a method of acquisition requiring the initial purchase of the equipment (Item #1), providing a maintenance ceiling price (#2), and a guaranteed repurchase price (#3).Please see the Contract, Section 1.16 Basis for Award, for specific details. | |
| Annual Leasing | |
| Contractor | JCB INC. |
| Make: | JCB |
| Model | 940 |
| http://www.jcb.com/(42wdop5514tw3ai4ifz3o345)/products/productdetail.aspx?pid=135&rid=4 | |
| Item Description | ROUGH TERRAIN FORK LIFT W/ VERTICAL MAST |
| Annual (12 month) Lease, including all delivery & maintenance: $17,352.00 | |
| ATTENTION:State Agencies must obtain PRIOR lease approval from the Florida Department of Financial Services BEFORE the leasing of equipment! | |
| Monthly Leasing | |
| Contractor | RING POWER CORPORATION |
| Make: | MANITOU |
| Model | M40 |
| http://www.kdmanitou.com/Specs/M40.pdf | |
| Item Description | ROUGH TERRAIN FORKLIFT |
| Monthly Lease, including all delivery & maintenance:$1550.00 | |
| ATTENTION:State Agencies must obtain PRIOR lease approval from the Florida Department of Financial Services BEFORE the leasing of equipment! | |
| Purchase | |
| Contractor | Yale Industrial Trucks |
| Discount * | ($100) |
| Model | Master Craft AE8112 |
| http://www.mclifts.com/ | |
| Price | $38,295.00 |
| Percentage discount off the current Manufacturer's Suggested Retail Price for non-specified options for the model bid. The percentage discount is applied to the Manufacturer's Suggested Retail Price to determine the actual price of an option. | |
| DISCOUNT % | 15% |
| CURRENT MSRP DATE | 8/1/2003 |
| *Discount for equipment picked up by ordering Eligible User at Contractor's place of business. | |
| Approximate delivery time required ARO: | 90 Days |
| Note to users:Options are listed for the purchase of this equipment only!Purchasers needing options for lease equipment or Total Cost acquisitions are to negotiate option prices with Contractors. | |
| 560-650-610 | FORKLIFT TRUCK, ROUGH TERRAIN, 8,000 LBS. CAPACITY |
| OPTIONS: | |
| 1001 | High efficiency bypass oil purification system. This system is designed to reduce or eliminate engine oil changes and extend its useful life. The Puradyn Oil Filtration System or approved equivalent. Puradyn Filter Technologies, Inc. 1-800-488-0577. |
| PRICE | N/A |
| 1002 | Mechanical front wheel drive steering axle for all wheel drive capability. Note to bidder: Provide only the difference in price between the two wheel drive model and the mechanical front wheel drive model offered. |
| PRICE | $4,200.00 |
| 1003 | High efficiency bypass oil purification system. This system is designed to reduce or eliminate hydraulic oil changes and extend its useful life. The Puradyn Oil Filtration System or approved equivalent. Puradyn Filter Technologies, Inc. 1-800-488-0577. |
| PRICE | N/A |
| 1004 | Special state color, DOT Yellow, Federal Yellow No. 13538, DuPont #L9069A, ACME No. 2712, Deere No. PT102, or approved equivalent, (may be Contractor painted if factory painting is not available). NOTE: The entire unit, including Options, shall be painted the same color. |
| PRICE | $150.00 |